0
Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
– 94 –
Chapter 5 Preparation — Power supply
Power supply
A battery or an external DC power supply can be used as the power supply.
Using batteries
Connection of the following batteries to the camera has been veried.
r Anton/Bauer batteries
HYTRON140
DIONIC90
r IDX batteries
ENDURA10
r PAG batteries
PAG L96e
@@
NOTE
t Other batteries can be supported by changing [BATTERY SELECT] in the main menu → [I/F SETUP] → [BATTERY/P2CARD]. Use of batteries that
are already veried as connectable to the camera is recommended.
t Before you use a battery, charge it with a battery charger. (For details on charging, refer to each instruction operation.)
t When using the light (Ultralight 2), using a battery of 90 Wh or more is recommended.
t When using a studio system (AG-BS300, AG-CA300G) to turn the light on, attach the battery plate to the AG-CA300G before attaching the battery.
Supply the light power supply from the battery plate. When supplying the light power supply from the light output terminal on the camera, overcurrent
when the light is turned on sometimes prevents the camera from starting because of the overcurrent protection of AG-BS300 and AG-CA300G.
Mounting and setting battery
Using Anton/Bauer batteries
Anton/Bauer batteries
Release lever
1
Mount the Anton/Bauer battery.
2
Insert the battery terminal and slide in the direction of the arrow.
3
Set the battery type.
Select the battery in the main menu → [I/F SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT].
For details, refer to “Setting menu basic operations” (page 134).
@@
NOTE
t To remove the battery, keep the release lever of the battery holder completely down, slide the battery in the opposite direction of when you mounted it.
Find Your Products By Category
Please Login
