Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 158 –
Chapter 7 Menu Operations — Menu list
Item Description of settings Remark
[SDI2/HDMI OUT] Selects the signal form to output to the monitor output terminal (<SDI OUT2> or
<HDMI OUT>).
[SYSTEM
MODE]
Outputs in the system mode signal format.
[DOWNCON] Outputs the down converter signal.
[1080P SDI2/HDMI
OUT]
Selects whether to convert the output signal of the monitor output terminal (<SDI
OUT2> or <HDMI OUT>) to 1080i when in 1080P mode.
f If the main menu → [I/F SETUP] → [OUTPUT
SEL] → [SDI2/HDMI OUT] is set to [DOWNCON],
the signal that was down-converted is output,
regardless of these settings.
[1080P] Outputs as 1080P.
[1080i] Converts to 1080i and outputs.
[3G-SDI OUT] Selects 1080P signals of the HD SDI output in 1080P mode.
[LEVEL-A] Selects the LEVEL-A method.
[LEVEL-B] Selects the LEVEL-B DL method.
[MONITOR OUT
MODE]
Selects the output signals of the monitor output terminal (<SDI OUT2>, <HDMI
OUT> or <VIDEO OUT2>). Operates independently of the <SDI OUT1> terminal.
[MEM] In playback mode, these are playback images.
[CAM]
When the main menu → [SYSTEM] → [SYSTEM MODE] →
[REC SIGNAL] is [CAM], output is always camera images.
[MONITOR OUT
ZEBRA]
Selects whether the zebra pattern is superimposed over the output video signals
from the monitor output terminals (<SDI OUT2>, <HDMI OUT>, and <VIDEO
OUT>). (The remote VBS signal also interlocks.)
[ON] Superimposes.
[OFF] Does not superimpose.
[SDI EDH]
Sets whether to add an error detection ag to SD SDI output.
[ON], [OFF]
[THUMBNAIL OUT] Selects whether to output the thumbnail of a clip displayed on the LCD monitor
to the <SDI OUT1> terminal, <SDI OUT2> terminal, <HDMI OUT> terminal, and
<VIDEO OUT> terminal.
[ON] Performs output.
[OFF] Does not output.
are factory settings.
[SDI OUT1 MARKER]
Item Description of settings Remark
[MARKER SW] Switches the marker.
[ON] Displays.
[OFF] Does not display.
[CENTER MARK] Switches the center marker.
[1]
+ (large)
[2] Open center (large)
[3]
+ (small)
[4] Open center (small)
[OFF] Does not display.
[SAFETY MARK] Selects the type of frame for the safety zone marker.
[1] Box
[2] Corners
[OFF] Does not display.
[SAFETY AREA]
Sets the size of the safety zone marker.
The constant ratio of length to width can be set in 1% increments.
[80%]…[90%]…[100%]
[FRAME MARK]
Enables/disables frame marker.
[ON], [OFF]
[FRAME SIG]
Sets frame marker aspect ratio.
[4:3], [13:9], [14:9], [VISTA], [CNSCO]
f [VISTA] is 16:8,65, and [CNSCO] is 16:6,81.
[USER BOX]
Sets whether to display the user box to the signal from the <SDI OUT1> terminal.
[ON], [OFF]
[USER BOX WIDTH]
Sets the width of the user box.
[1]…[13]…[100]
[USER BOX HEIGHT]
Sets the height of the user box.
[1]…[13]…[100]
[USER BOX H POS]
Sets the horizontal position of the center of the user box.
[−50]…[0]…[50]
[USER BOX V POS]
Sets the vertical position of the center of the user box.
[−50]…[0]…[50]
are factory settings.

   Find Your Products By Category