Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 72 –
Chapter 4 Adjustments and Settings for Recording — Viewnder status display
[AWB NG]
Displayed when automatic white balance operation is not ended successfully. The 2nd line displays that status.
[COLOR TEMP LOW] Warns that the color temperature is too low.
[COLOR TEMP HIGH] Warns that the color temperature is too high.
[LEVEL OVER] Warns that the brightness is too high.
[LOW LIGHT] Warns that the brightness is too low.
[TIME OVER] Warns that processing could not be executed within the operation time.
[ATW MODE] Displayed when automatic white balance cannot be executed due to activation of auto tracking white balance.
[AWB PRESET *.*K]
Displayed when the <WHITE BAL> switch is set to <PRST> and automatic white balance operation cannot be executed.
[AWB UNABLE]
Displayed when automatic white balance operation cannot be executed. The 2nd line displays that status.
[S.GAIN MODE] Displayed when super gain is active.
[CHECK FILTER] Prompts re-conrmation of the lter switching dial position when the power is turned on and automatic white balance is active.
[ABB ACTIVE] Displayed when automatic black balance operation is active.
[ABB OK] Displayed when automatic black balance operation is ended successfully.
[ABB BREAK] Displayed when automatic black balance operation is forcibly ended.
[ABB NG] Displayed when automatic black balance operation is not ended successfully.
[B-SHD READY]
Displayed when black shading operation is accepted by holding down the <AUTO W/B BAL> switch during automatic black
balance operation.
[B-SHD ACTIVE] Displayed when black shading operation is active.
[B-SHD OK] Displayed when black shading operation is ended.
[B-SHD BREAK] Displayed when black shading operation is forcibly ended.
[B-SHD NG] Displayed when black shading operation is not ended successfully.
(Switch selection display)
[WHITE:#]
Displayed when the <WHITE BAL> switch is switched. One of [A]/[B]/[PRST] is displayed at [#].
[ATW MODE] Displayed when automatic tracking white balance operation is set.
[*.*K]
Displays the currently set color temperature.
[AUTO KNEE:ON/OFF]
Displayed when the <OUTPUT>/<AUTO KNEE> selector switch where [ON] or [OFF] is assigned in the main menu →
[CAMERA] → [SW MODE] → [AUTO KNEE SW] is set to <ON>/<OFF>.
[DRS:ON/OFF]
Displayed when the <OUTPUT>/<AUTO KNEE> selector switch where [DRS] is assigned in the main menu → [CAMERA] →
[SW MODE] → [AUTO KNEE SW] is set to <ON>/<OFF>.
[GAIN:**dB+**↑]
Displayed when gain is switched by the <GAIN> switch or <USER> button. When digital super gain is active, that value is
displayed at the same time.
[SS:1/****] or
[***.*deg]
When the shutter speed is switched, that value is displayed.
[SS: w 1/****] or
[w***.*d]
Displayed when syncro scan is selected for the shutter speed.
[CC:****@**K]
Displayed when the <CC FILTER> dial position is switched.
[ND:*]
Displayed when the <ND FILTER> dial position is switched.
[EXTENDER:ON/OFF] Displays the status of the lens extender.
[IRIS:**F*.*]
Displayed when the iris override compensation value is altered.
(Drop in brightness warning display)
[LOW LIGHT] Displayed when brightness has dropped.
(Flash band compensation warning display)
[FBC OFF!] Displayed when a ash band is detected while ash band compensation is off.
[SHUTTER&FBC ON!] Displayed when the <SHUTTER> switch is <ON> and ash band compensation is set to on.
6 <USER> button assignment information
[UM] Indicates the <USER MAIN> button.
[U1] Indicates the <USER1> button.
[U2] Indicates the <USER2> button.
[U3] Indicates the <SHOT MARK> button.
[U4] Indicates the <TEXT MEMO> button.
[RET] Indicates the <RET> button.
[INHIBIT] Displayed when the <USER> button is not operated.
[S.GAIN **dB/OFF]
Displays the selected super gain.
[DS.GAIN **↑/OFF]
Displays the selected digital super gain.
[S.IRIS ON/OFF] Displays the super iris operation status.
[I.OVR ON/OFF] Displays the iris override operation status.
[S.BLK −**/OFF]
Displays the super black operation status. During operation, the setting value is also displayed.
[B.GAMMA ON/OFF] Displays the operation status of black gamma (black level tone compensation).
[D.ZOOM x2/x3/x4/OFF] Displays the digital zoom factor.
[ATW ON/OFF] Displays the operation status of automatic tracking white balance.
[ATW LOCK ON/OFF] Displays the lock status of automatic tracking white balance operation.
[AUD CH1/3] Displayed when the input signal to record to audio channel 1 or 3 is switched.

   Find Your Products By Category