Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 194 –
Chapter 9 Maintenance and Inspection — Warning system
Warning system
Warnings description list
If an error is detected immediately after the camera turns on or during operation, the <WARNING> lamp, the lamp on the viewnder screen, and an
alarm indicate the error.
@@
NOTE
t The priority order of each item is the warning lamp, tally lamp, and alarms, and if multiple errors occur simultaneously, highest priority one is indicated.
“Reduced wireless audio reception” may not be indicated depending on the setting in the main menu → [I/F SETUP] → [MIC/AUDIO] → [WIRELESS
WARN].
1 System error
Display in display window The error code is displayed in the time code display.
Warning lamp Flashes four times per second.
Tally lamp Flashes four times per second.
Viewnder The [SYSTEM ERROR] display, error codes, and, on the lower line of these, the cause are displayed.
Alarm Sounds continuously.
Warning content Standard signal error or communication error.
Recording or playback operation Stops.
Action to take Check the factor display “Error code” and consult your dealer.
2 Mismatched format
Display in display window The error code [E-31] is displayed in the time code display.
Warning lamp Flashes four times per second.
Tally lamp Flashes four times per second.
Viewnder [TURN POWER OFF] and [SYSTEM MODE] are displayed.
Alarm Sounds continuously.
Warning content An internal mismatch occurs in system mode and a restart is required.
Recording or playback operation Does not operate.
Action to take Follow the message to turn the power off once, turn the power on again, and check that there is no error display.
3 Card removal error
Display in display window The error code [E-30] is displayed in the time code display.
Warning lamp Flashes four times per second.
Tally lamp Flashes four times per second.
Viewnder [TURN POWER OFF] and [P2 CARD] are displayed.
Alarm Sounds continuously.
Warning content An error occurred in the camera built-in memory because the P2 card being accessed was ejected.
Recording or playback operation Does not operate.
Action to take
Follow the message to turn the power off once and turn the power on again. Ensure that there is no error in the clips on
the ejected card, and repair the clips as necessary.
4 Battery end (low voltage input)
Display in display window Seven battery charge level bars ash.
Warning lamp Lights.
Tally lamp Flashes once per second.
Viewnder
The [BATT] lamp is illuminated if the viewnder has the [BATT] lamp. [EMP] ashes in the battery charge level display.
([%] ashes for [BATT STAT] and [ENDURA STAT].)
Alarm Sounds continuously.
Warning content The battery has run out.
Recording or playback operation Stops.
Action to take
Change the batteries.
If the external AC adaptor is inserted from the <EXT DC IN> terminal, the warning will be released.
5 P2 card end
Display in display window Seven media charge level bars ash.
Warning lamp It stays illuminated until some operation is performed after recording.
Tally lamp It continues to ash four times per second until some operation is performed after recording.
Viewnder
The [END] display ashes in the P2 remaining charge display.
(If the viewnder has the [SAVE] lamp, and [P2CARD] is set in the main menu → [VF] → [VF INDICATOR] → [SAVE
LED], the [SAVE] lamp ashes four times per second.)
Alarm It continues to sound until some operation is performed after recording.
Warning content The P2 card space is used up.
Recording or playback operation Recording will stop.
Action to take Delete clips in the recording media or insert a new recording media.

   Find Your Products By Category