0
Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
– 153 –
Chapter 7 Menu Operations — Menu list
Item Description of settings Remark
[EXPORT] When in USB storage mode, exports (writes) from the P2 card or SD memory card
to a storage device by units of card.
If [ALL SLOT] is selected, card data from both slots currently in use (slots 1 and 2
or slots 3 and 4) can be combined and exported.
f Enabled only in USB storage mode.
[IMPORT] Imports (writes-back) clips from a storage device to a P2 card in units of card
when in USB storage mode.
f Valid for type S storage only.
f Only writes back to a card with a serial number
matching the original card serial number.
f Displayed only in storage explorer.
[REPAIR] Repairs a clip displayed in the defective clip indicator (yellow) occurring as a result
of sudden power loss during recording or other reasons.
f Repair may be impossible, depending on how
it was damaged. When repair is impossible, a
yellow indicator is displayed.
[RE-CONNECT] If clips that were recorded over multiple P2 cards are not recognized as
consecutive clips and the incomplete clip indicator [
] is displayed, use this
function to restore the clips to the consecutive clips (the original combined clips).
f Incomplete clips are formed in the following
cases:
- When clips recorded to multiple P2 cards are
copied separately to individual P2 cards.
- When clips recorded to multiple cards are
copied separately to individual storage device
cards and then re-written to P2 cards.
f Even if only some of the incomplete clips divided
into 3 or more are linked, the incomplete clip
indicator will stay on until all of the clips that
comprise the original clips are linked.
[EXCH. THUMBNAIL] Changes the clip thumbnail to an image with any text memo. This can be
executed while the text memo clip is displayed.
[EXPLORE] Switches to the information display screens for storage when in USB storage
mode.
f Enabled only in USB storage mode.
[AUTHENTICATE] When this menu is selected from the card status screen, a software keyboard
is displayed to enter the CPS password. If the password is entered and [OK] is
selected, the CPS password is set to the camera.
When the set CPS password is successfully authenticated, the message
[AUTHENTICATED SUCCESSFULLY!] is displayed.
When the set CPS password authentication fails, a warning message (page 196)
is displayed.
[CHANGE PARTITION
NAME]
Sets and changes the storage partition name in USB storage mode. fThe initial value is the date and time that the
partition was created.
f Valid for type S storage only.
f Displayed only in storage explorer.
[DELETE LAST
PARTITION]
Deletes the last storage partition when in USB storage mode. f Can only be deleted when the cursor is in the last
partition.
f Displayed only in storage explorer.
[DELETE FOLDER] Delete folders in the storage device in the FAT format. f Displayed only in storage explorer.
are factory settings.
[THUMBNAIL SETUP]
Item Description of settings Remark
[INDICATOR] Selects an item to display and press the <SET> button. Checked items are
displayed. When [ALL HIDE] is selected, other items cannot be selected.
f Defective clip indicator (yellow, red), unknown clip
indicator, and incomplete clip indicator are always
displayed, regardless of the settings.
[ALL HIDE] Hides all indicators.
[MARKER] Displays the shot mark indicator.
[TEXT MEMO] Displays the text memo indicator.
[WIDE] Displays the wide indicator.
[PROXY] Displays the proxy indicator.
[DATA DISPLAY] Selects the content to display in the time display area.
[TC] Displays the time code.
[UB] Displays the user bits.
[TIME] Displays the record time.
[DATE] Displays the record date.
[DATE TIME] Displays the record date and time.
[CLIP NAME] Displays clip names.
[USER CLIP
NAME]
Displays a maximum of the rst 15 letters (for an English
language display) of a user clip name.
[SLOT] Displays slot number.
[THUMBNAIL
TC]
Displays the time code of the thumbnail position.
[THUMBNAIL SIZE] Sets the thumbnail size displayed in a thumbnail on the screen.
[SMALL]
Small (thumbnail display: with 4×3 and property display)
[MEDIUM]
Standard (thumbnail display: 4×3)
[LARGE]
Large (thumbnail display: 3×2)
are factory settings.
Find Your Products By Category
Please Login
