0
Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
– 149 –
Chapter 7 Menu Operations — Menu list
Item Description of settings Remark
[USER1] (Select a
function)
Assigns the <USER1> button.
For selectable functions and an explanation of functions, refer
to “Assigning functions to <USER> buttons” (page 56).
[S.GAIN] is assigned in the factory setting.
(Detection
time)
Selects a response to accept when the <USER1> button is
pressed.
[NORMAL] Accepts immediately when pressed.
[1sec] Accepts when pressed and held down for
approx. one second.
[USER2] (Select a
function)
Assigns the <USER2> button.
For selectable functions and an explanation of functions, refer
to “Assigning functions to <USER> buttons” (page 56).
[DS.GAIN] is assigned in the factory setting.
(Detection
time)
Selects a response to accept when the <USER2> button is
pressed.
[NORMAL] Accepts immediately when pressed.
[1sec] Accepts when pressed and held down for
approx. one second.
[SHOT MARK (U3)] (Select a
function)
Assigns the <SHOT MARKER> button.
For selectable functions and an explanation of functions, refer
to “Assigning functions to <USER> buttons” (page 56).
[SHOT MARK] is assigned in the factory setting.
(Detection
time)
Selects a response to accept when the <SHOT MARKER>
button is pressed.
[NORMAL] Accepts immediately when pressed.
[1sec] Accepts when pressed and held down for
approx. one second.
[TEXT MEMO (U4)] (Select a
function)
Assigns the <TEXT MEMO> button.
For selectable functions and an explanation of functions, refer
to “Assigning functions to <USER> buttons” (page 56).
[TEXT MEMO] is assigned in the factory setting.
(Detection
time)
Selects a response to accept when the <TEXT MEMO> button
is pressed.
[NORMAL] Accepts immediately when pressed.
[1sec] Accepts when pressed and held down for
approx. one second.
are factory settings.
[SW MODE]
Item Description of settings Remark
[RET SW] Sets the function when the <RET> button on the lens is pressed. f The return video is not displayed correctly when
an image signal that differs from the video system
of this camera.
f When the main menu → [I/F SETUP] →
[GENLOCK] → [GENLOCK] is set to [INT], return
video images may sometimes be skewed slightly
in the horizontal direction.
f When switching between camera images and
return video images, the image on the viewnder
and LCD monitor may be disrupted for an instant.
This is not a malfunction.
[INHIBIT] The <RET> button function is disabled.
[REC CHECK] Recording check function is enabled. Records can be checked
of the last several seconds recorded.
[CAM RET] Return video function is enabled. While the <RET> button is
pressed, the signal supplied to the <SDI IN> terminal can be
checked on the viewnder and LCD monitor.
[ASSIST] Turns the focus assist display [ON]/[OFF].
[D.ZOOM] Digital zoom function is enabled. Digital zoom can be switched
[ON]/[OFF].
[EVF CLR] Selects whether to display video in the viewnder in color or in
black and white.
[TEXT MEMO] Text memo function is enabled. A text memo can be recorded to
the frame selected when the button is pressed.
[SHOT MARK] Shot mark function is enabled. Press to add a shot mark, and
press again to remove it.
[S.BLK LVL]
Sets the super black level.
[−30], [−20], [−10], [OFF]
[AUTO KNEE SW] Enables/disables auto knee function and DRS function.
[DRS] When the <AUTO KNEE> switch is in the <ON> position, DRS
function is enabled.
[ON] When the <AUTO KNEE> switch is in the <ON> position, auto
knee function is enabled.
[OFF] Even if the <AUTO KNEE> switch is in the <ON> position, both
auto knee function and DRS function are not enabled.
[SHD,ABB SW CTL]
Sets whether to automatically adjust black shading when the <AUTO W/B BAL>
switch is pressed and held down on the <ABB> side for two seconds or more.
[ON], [OFF]
are factory settings.
Find Your Products By Category
Please Login
