Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 53 –
Chapter 4 Adjustments and Settings for Recording — Setting the electronic shutter
Setting the electronic shutter
Shutter mode
The shutter modes available on the camera’s electronic shutter and shutter speeds that can be selected are as follows.
Using a xed shutter speed
fTo remove icker caused by lighting
fTo shoot fast-moving subjects clearly
Using the synchro scan mode
fTo shoot so that stripe patterns are eliminated in the horizontal direction when shooting on the monitor screen
fTo shoot moving subjects with special effects
Using the half shutter speed
fTo shoot lms with special effects
[LINE&FREQ] Shutter speed Half shutter speed Variable range of synchro scan mode
[1080-59.94P] [1/100], [1/120], [1/250], [1/500],
[1/1000], [1/2000], [HALF], [180.0deg],
[172.8deg], [144.0deg], [120.0deg],
[90.0deg], [45.0deg]
1/120 1/60.1 - 1/7200
3.0 deg - 359.5 deg
(in 0.5 deg steps)
[1080-59.94i] 1/120 1/60.1 - 1/7200
[480-59.94i] 1/120 1/60.1 - 1/7200
[1080-50P]
[1/60], [1/120], [1/250], [1/500],
[1/1000], [1/2000], [HALF], [180.0deg],
[172.8deg], [144.0deg], [120.0deg],
[90.0deg], [45.0deg]
1/100 1/50.1 - 1/6000
[1080-50i] 1/100 1/50.1 - 1/6000
[576-50i] 1/100 1/50.1 - 1/6000
Setting the shutter mode and speed
Switch the <SHUTTER> switch to set the shutter speed in the shutter mode.
The shutter speed in the synchro scan mode can be easily change by the <SYNCHRO SCAN> adjustment button on the side.
The shutter speed selection range can be restricted or use of the synchro scan mode can be selected beforehand in the main menu → [CAMERA] →
[SHUTTER SPEED] and [SHUTTER SELECT].
Once selected, the shutter speed is saved even after the camera is turned off.
<SHUTTER> switch
1
Press the <SHUTTER> switch positioned at <OFF> towards <ON>.
2
Press the <SHUTTER> switch from <ON> towards <SEL>, and repeat this operation until the desired mode or speed is displayed
on the viewfinder screen.
fIf all modes and speeds are available, the display changes in the following order.
POSITION1 POSITION2 POSITION3 POSITION4 POSITION5 POSITION6
Standard mode
Synchro scan mode
@@
NOTE
t Whichever mode the electronic shutter is used in, the higher the shutter speed, the lower the sensitivity of the camera becomes.
t When the aperture is in the automatic mode, it will increasingly open and the depth of focus will become shallower as the shutter speed is increased.
t Under lighting conditions using uorescent lighting or other discharge tube, horizontal stripes might appear on screen. If this happens, this can be
improved by adjusting the shutter speed.

   Find Your Products By Category