0
Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
– 155 –
Chapter 7 Menu Operations — Menu list
Item Description of settings Remark
[HOLD] Selects whether to hold [RECORDING] settings.
[ON] Holds.
[OFF] Does not hold. It will always be [NORMAL] the next time that
power is turned on.
[PRE REC] Selects whether to perform pre-recording. Sets the time to perform continuous
pre-recording when [ON] is selected.
f [ON] cannot be selected in the following cases:
- When the main menu → [SYSTEM] →
[SYSTEM MODE] → [LINE&FREQ] is set to
[1080-59.94P] or [1080-50P]
- When the main menu → [SYSTEM] →
[SYSTEM MODE] → [REC SIGNAL] is set to
[SDI]
- When the main menu → [REC/PB] → [REC
FUNCTION] → [RECORDING] is set to other
than [NORMAL]
[ON] Performs pre-recording.
[OFF] Does not perform pre-recording.
[PRE REC TIME]
Congures pre-recording settings.
Sets a time that can be recorded by counting backward from the time that the
<REC> button is pushed.
Up to a maximum of 15 seconds can be selected in DVCPRO and DV modes, and
up to 8 seconds in other modes.
HD, DVCPRO50: [0s]…[8s]
DV or DVCPRO: [0s]…[8s]…[15s]
are factory settings.
[REC/PB SETUP]
Item Description of settings Remark
[REC MEDIA] Selects the slot for the media to be recorded. f Recording is not possible when a card is inserted
into a slot that is not selected.
[P2] Uses P2 memory cards (slots 1 and 2).
[microP2] Uses microP2 memory cards (slots 3 and 4).
[FILE SPLIT] Selects whether to divide the recording le in 4 GB units or one le when
recording in the microP2 memory card (that exceeds 32 GB) in AVC-LongG
format.
f If done in one le, that clip cannot be copied to a
P2 memory card or 32 GB microP2 memory card,
or copied or exported to storage.
[ONE FILE] Records in 1 le.
[SPLIT] Divides in 4 GB units.
[START TEXT MEMO] Selects the function that automatically adds a text memo at recording start
position each time recording is started.
f Text memos added when this item is [ON] indicate
the recording start position. To record text memos
as character information, refer to “Setting clip
metadata” (page 116).
[ON] A text memo is added to each recording.
[OFF] Does not add a text memo.
[P.ON REC SLOT
SEL]
Selects the slot order targeted for recording when power is turned on.
[HOLD] Records from the recording slot used the last time power was
turned off.
[SLOT 1/3] Each time the power is turned on, this changes in order from
slot 1 or 3 (slot selected in [REC MEDIA]) to the recording
target card.
[REC START] Selects acceptance of the start of recording.
f If the main menu → [REC/PB] → [REC
FUNCTION] → [RECORDING] is set to other than
[NORMAL], operation will be [NORMAL] even
when this item is set to [ALL].
[ALL] Accepts start of recording during stop, during recording pause,
and during playback.
[NORMAL] Accepts start of recording during stop and during recording
pause.
[REC TALLY] Selects the method to display recording status at the camera. fIf set [GREEN] or [CHAR], the viewnder front
tally lamp, back tally lamp and rear tally lamp do
not light while this camera is recording.
[RED] The red tally lamp lights.
[GREEN] The green tally lamp lights.
[CHAR] The characters “REC” are displayed in the viewnder.
[ACCESS LED] Selects whether to light the access LED of the P2 card.
[ON] Lights.
[OFF] Does not light.
[SEEK POS SEL] Selects the position to move when the <FF/REW> button is pressed while
playback is paused.
[CLIP] Top of the clip
[CLIP&TEXT
MEMO]
Top of the clip and text memo location
are factory settings.
Find Your Products By Category
Please Login
