Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 164 –
Chapter 7 Menu Operations — Menu list
Item Description of settings Remark
[ENDURA10 NEAR
END]
Selects the near end voltage in steps of 0.1 V when the main menu → [I/F
SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [ENDURA10].
[12.0V]…[13.4V]…[15.0V]
[PAG L96e NEAR
END]
Selects the near end voltage in steps of 0.1 V when the main menu → [I/F
SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [PAG L96e].
[12.0V]…[13.0V]…[15.0V]
[TYPE A FULL]
Selects the voltage for full display in steps of 0.1 V when the main menu → [I/F
SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE A].
[13.0V]…[15.6V]…[17.0V]
The [TYPE A] factory setting corresponds to the IDX
ENDURA ELETE.
[TYPE A NEAR END]
Selects the near end voltage in steps of 0.1 V when the main menu → [I/F
SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE A].
[11.0V]…[13.2V]…[15.0V]
[TYPE A END]
Selects the end voltage in steps of 0.1 V when the main menu → [I/F SETUP] →
[BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE A].
[11.0V]…[12.5V]…[15.0V]
[TYPE B FULL]
Selects the voltage for full display in steps of 0.1 V when the main menu → [I/F
SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE B].
[13.0V]…[15.9V]…[17.0V]
The [TYPE B] factory setting corresponds to the
Anton/Bauer DIONIC HC.
[TYPE B NEAR END]
Selects the near end voltage in steps of 0.1 V when the main menu → [I/F
SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE B].
[11.0V]…[12.9V]…[15.0V]
[TYPE B END]
Selects the end voltage in steps of 0.1 V when the main menu → [I/F SETUP] →
[BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE B].
[11.0V]…[12.5V]…[15.0V]
[TYPE C FULL]
Selects the voltage for full display in steps of 0.1 V when the main menu → [I/F
SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE C].
[13.0V]…[15.9V]…[17.0V]
[TYPE C NEAR END]
Selects the near end voltage in steps of 0.1 V when the main menu → [I/F
SETUP] → [BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE C].
[11.0V]…[13.2V]…[15.0V]
[TYPE C END]
Selects the end voltage in steps of 0.1 V when the main menu → [I/F SETUP] →
[BATTERY/P2CARD] → [BATTERY SELECT] is set to [TYPE C].
[11.0V]…[12.5V]…[15.0V]
[BATT STAT NEAR
END]
Selects the near end percent value.
[4%], [5%], [6%], [7%], [8%], [9%], [10%], [12%], [14%], [16%], [18%], [20%]
f When the battery charge level percentage cannot
be detected, this will follow the near end voltage
value set in [TYPE A].
f If a battery is used for which the remaining charge
is displayed in units of 10%, the setting value and
actual near end warning may vary slightly.
[BATT STAT END]
Selects the end percent value.
[1%]…[10%]
f When the battery charge level percentage cannot
be detected, this will follow the end voltage value
set in [TYPE A].
f When using a battery which displays battery
charge level by units of 10%, end is determined
only in two stages: when it is set between [1%]
and [5%], or when it is set between [6%] to [10%].
[ENDURA STAT
NEAR END]
Selects the near end percent value.
[4%], [5%], [6%], [7%], [8%], [9%], [10%], [12%], [14%], [16%], [18%], [20%]
f When the battery charge level percentage cannot
be detected, this will follow the near end voltage
value set in [TYPE A].
f If a battery is used for which the remaining charge
is displayed in units of 10%, the setting value and
actual near end warning may vary slightly.
[ENDURA STAT END]
Selects the end percent value.
[1%]…[10%]
f When the battery charge level percentage cannot
be detected, this will follow the end voltage value
set in [TYPE A].
f When using a battery which displays battery
charge level by units of 10%, end is determined
only in two stages: when it is set between [1%]
and [5%], or when it is set between [6%] to [10%].
are factory settings.
[FILE]
SD memory cards cannot be read, and le operations associated with saves, [LOAD USER DATA] and [LOAD FACTORY DATA] cannot be performed in
the following cases:
fWhile the thumbnail screen is displayed
Remedy: Press the <THUMBNAIL> button to close the thumbnail screen, and try the operations again.
fDuring playback
Remedy: Press the <STOP> button to stop playback, and try the operations again.

   Find Your Products By Category