0
Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
– 62 –
Chapter 4 Adjustments and Settings for Recording — Setting the time data
Setting the time data
The camera provides time codes, user bits, and date/time (real time) data as time data, and they are recorded in frame in sync with video. They are also
recorded as data for clip metadata les. A CTL counter and camera ID are built in.
Denition of time data
r Time code
Recording run and free run can be switched by the <TCG> switch.
fFree run: The time code always advances even when the power is turned off, and it can be handled in the same way as time. It can also be slaved to
the time code input to the <TC IN> terminal.
fRecording run: The time code can be regenerated to the time code of clips recorded to P2 cards and recorded as a continuous value.
r User bits
Two types of user bits are built in.
fLTC UB: Recorded as LTC and output from the <TC OUT> terminal. It is also output as LTC of the HD SDI signal.
fVITC UB: Recorded as VITC (recorded to VIDEO AUX area by DVCPRO). It is also output as VITC of the HD SDI signal.
You can select and record user set values, time, year/month/day, the same value as time codes, camera frame rate information, and input value of
external signals from the <TC IN> terminal, etc., respectively.
@@
NOTE
t Only one type of user set values is recorded.
r Date/time (real time)
fThe internal clock is used for measuring the free run time code while the power is off and as the time and year/month/day data of the user bits. It is
also used as the reference for le generation times during clip recording, which determine the sorting order of thumbnails and the order of playback.
fIt is also used to generate clip metadata.
For details, refer to “Setting the date/time of the internal clock” (page 30).
r CTL counter
fDuring recording, the CTL counter measures the total recording time since the last reset. During playback, it is also the value for counting the
beginning of playable clips as a reference point. It can be used as a means for relatively learning the current playback position.
r Camera ID
f10 characters x 3 lines can be set as the camera ID which can be recorded superimposed over the color bar image. It can also be recorded
superimposed simultaneously on the date/time data.
Recording and output of time codes and user bits
Recording and output of time codes
System setting state Recording TC Output TC
[LINE&FREQ] [REC FORMAT] LTC VITC TC OUT LTC, VITC of HD SDI
[1080-59.94i] Respective format
Recording run/free run*
[DF]/[NDF]
30 frames
Same value as LTC LTC is output. LTC is output.
[1080-50i] Respective format
Recording run/free run*
25 frames
Same value as LTC LTC is output. LTC is output.
[1080-59.94P] Respective format
Recording run/free run*
[DF]/[NDF]
30 frames
Same value as LTC LTC is output. LTC is output.
[1080-50P] Respective format
Recording run/free run*
25 frames
Same value as LTC LTC is output. LTC is output.
[480-59.94i] Respective format
Recording run/free run*
[DF]/[NDF]
30 frames
Same value as LTC
(No recording in [DV]
mode)
Same value as LTC None
[576-50i] Respective format
Recording run/free run*
25 frames
Same value as LTC
(No recording in [DV]
mode)
Same value as LTC None
* For free run, the time code is slaved to the input TC of the <TC IN> terminal.
Recording and output of user bits
System setting state Recording UB Output UB
[LINE&FREQ] [REC FORMAT] LTC UB VITC UB
<TC OUT> terminal
UB
LTC UB for HD SDI VITC UB for HD SDI
[1080-59.94i] Respective format
Following [UBG
MODE]*
Following [VITC UBG
MODE]
LTC UB is output. LTC UB is output. VITC UB is output.
[1080-50i] Respective format
Following [UBG
MODE]*
Following [VITC UBG
MODE]
LTC UB is output. LTC UB is output. VITC UB is output.
[1080-59.94P] Respective format
Following [UBG
MODE]*
Following [VITC UBG
MODE]
LTC UB is output. LTC UB is output. VITC UB is output.
[1080-50P] Respective format
Following [UBG
MODE]*
Following [VITC UBG
MODE]
LTC UB is output. LTC UB is output. VITC UB is output.
Find Your Products By Category
Please Login
