Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 141 –
Chapter 7 Menu Operations — Menu list
R-Y
B-Y
Skin tone area
[Q PHASE]
[I WIDTH]
[I CENTER]
[Q WIDTH]
+ direction
- direction
fWhen saving or reading setup les from an SD memory card, you can save items with an [S] and items without an [S] separately. Items with an [S] in
front of the item name are the targets for [PAINT([S]SELECT)] in the main menu → [FILE] → [SETUP DATA SELECT]. Items without an [S] are targets
for [PAINT(LEVEL)].
[KNEE/LEVEL]
Item Description of settings Remark
[MASTER PED]
Sets the master pedestal.
[−200]…[16]…[200]
[[S] MANUAL KNEE]
Sets the mode when the <OUTPUT>/<AUTO KNEE> switch is <OFF>. This
enables the [KNEE MASTER POINT]/[KNEE MASTER SLOPE] setting value
when the switch is [ON].
[ON], [OFF]
[KNEE MASTER
POINT]
Sets the knee point position in 0.5% steps.
[70.0%]…[93.0%]…[107.0%]
f The setting becomes invalid when [FILM-REC]
or [VIDEO-REC] is selected in the main menu →
[PAINT] → [GAMMA] → [GAMMA MODE SEL].
[KNEE MASTER
SLOPE]
Sets the knee inclination.
[0]…[85]…[99]
f The setting becomes invalid when [FILM-REC]
or [VIDEO-REC] is selected in the main menu →
[PAINT] → [GAMMA] → [GAMMA MODE SEL].
[[S] WHITE CLIP]
Turns the white clip function [ON]/[OFF]. This enables the [WHITE CLIP LVL]
setting value when the function is [ON].
[ON], [OFF]
[WHITE CLIP LVL]
Sets the white clip level.
[90%]…[109%]
[A.KNEE POINT]
Sets the auto knee point position in 1% steps.
This is enabled when the <OUTPUT>/<AUTO KNEE> switch is <CAM>/<ON>.
[80%]…[90%]…[107%]
[A.KNEE LVL]
Sets the auto knee level.
[100]…[107]…[109]
[A.KNEE RESPONSE]
Sets the auto knee response speed. The smaller the setting value, the faster the
response speed is.
[1]…[4]…[8]
[CHROMA LEVEL]
Sets the chroma level of P
R
and P
B
signals.
When this is set to [OFF], the color components of the video signal are removed.
[OFF], [−99%]…[0%]…[40%]
[DRS MODE] Sets the effectiveness of DRS color preservation.
[MODE1] Sets the hue of high-brightness areas to its natural state.
[MODE2] Makes the hue of high-brightness areas more vivid.
[DRS EFFECT
DEPTH]
Sets the compression level for the high-brightness areas of DRS. The higher the
value, the higher the compression level of high-brightness areas becomes.
[1], [2], [3]
[[S] HI-COLOR SW]
Turns the mode that expands the color dynamic range [ON]/[OFF].
[ON], [OFF]
[HI-COLOR LVL]
Selects the level of the mode that expands the color dynamic range.
[1]…[32]
are factory settings.
fWhen saving or reading setup les from an SD memory card, you can save items with an [S] and items without an [S] separately. Items with an [S] in
front of the item name are the targets for [PAINT([S]SELECT)] in the main menu → [FILE] → [SETUP DATA SELECT]. Items without an [S] are targets
for [PAINT(LEVEL)].
[GAMMA]
Item Description of settings Remark
[MASTER GAMMA]
Congure master gamma settings in 0.01 steps.
[0.30]…[0.45]…[0.75]
[R GAMMA]
Sets the gamma of Rch.
[−15]…[0]…[15]
[B GAMMA]
Sets the gamma of Bch.
[−15]…[0]…[15]
are factory settings.

   Find Your Products By Category