0
Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
– 156 –
Chapter 7 Menu Operations — Menu list
[PROXY SETUP]
Item Description of settings Remark
[REC MEDIA] Selects media for recording proxy data. f In the following case, proxy data cannot be
recorded even if [REC MEDIA] is set to [P2] or
[P2&SD].
- When the main menu → [REC/PB] → [REC
FUNCTION] → [RECORDING] is set to other
than [NORMAL]
[P2] Records proxy data to the P2 card.
[P2&SD] Records proxy data to both the P2 card and SD memory card.
[OFF] Does not record proxy data.
[REC MODE (HD)]
Sets the recording mode of proxy data. (in the HD mode only)
[STD 2CH MP4], [LOW 2CH MOV], [HQ 2CH MOV], [HQ 4CH MOV], [SHQ 2CH
MOV]
[TC SUPER] Sets whether to superimpose time code display on the proxy data recorded
images.
[UPPER] Superimposes the time code display at the top of the recorded
images.
[LOWER] Superimposes the time code display at the bottom of the
recorded images.
[OFF] Does not superimpose time code on recorded images.
[PROXY DISP] Selects whether to display proxy data recorded information or messages in the
viewnder and LCD monitor.
f This can also be set in the main menu → [VF] →
[VF INDICATOR] → [PROXY DISP].
[ON] Displays proxy recording information and SD memory card
remaining capacity at the start of recording.
Warning information is displayed at all times.
[OFF] Displays proxy and SD memory card warning information for
only three seconds when warning occurs.
are factory settings.
[TC/UB]
Item Description of settings Remark
[UBG MODE] Selects the user bits mode.
[USER] Selects the user bits value set in the display window.
[TIME] Selects the local time. (hh, mm, ss)
[DATE] Selects the local date and time. (YY, MM, DD, hh)
[EXT] Records the user bits values currently entered to the <TC IN>
terminal.
[TCG] The [TCG] value is entered to the user bits.
[FRAME RATE] Selects camera imaging information (such as frame rate).
[REGEN] Reads the value recorded to the card and continuously records
that value.
[VITC UBG MODE] Selects the VITC user bits mode.
[USER/EXT] If [UBG MODE] is operating in [EXT], that value is followed and
when not [EXT], a user value set in [USER] is recorded.
[TIME] Selects the local time. (hh, mm, ss)
[DATE] Selects the local date and time. (YY, MM, DD, hh)
[TCG] The time code generator value is entered to the user bits.
[FRAME RATE] Selects camera imaging information (such as frame rate).
[REGEN] Reads the value recorded to the card and continuously records
that value.
[DF MODE] Sets drop frame mode/non-drop frame mode of the [CTL] and [TCG].
[DF] Uses the drop frame mode.
[NDF] Uses the non-drop frame mode.
[TCG SET HOLD]
If the internal time code generator is set with the <TCG> switch before turning
power off, switch [ON]/[OFF] for the function that recording starts from the preset
value when turning on the power to start recording.
[ON], [OFF]
[FIRST REC TC] Selects whether to regenerate the time code to the value on the P2 card at the
rst recording after power is turned on, a P2 card is inserted, or the P2 card
targeted for recording is switched.
f Make sure the date and time are correctly set. For
the setting method, refer to “Setting the date/time
of the internal clock” (page 30).
[PRESET] Uses the internal time code of the camera.
[REGEN] Regeneration is performed for the time code of the clip with
the newest date and time of the clips recorded to the P2 card
targeted for recording.
[TC OUT] Selects the time code output to the <TC OUT> terminal.
[TCG] Outputs the time code generator value at all times.
[TCG/TCR] Outputs the time code generator value during recording and the
time code reader value during playback.
are factory settings.
Find Your Products By Category
Please Login
