0
Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
– 138 –
Chapter 7 Menu Operations — Menu list
Item Description of settings Remark
[R-Mg (PHASE)]
Corrects the hue between red and magenta.
[−63]…[5]…[63]
[Mg (PHASE)]
Corrects the magenta hue.
[−63]…[3]…[63]
[Mg-B (PHASE)]
Corrects the hue between magenta and blue.
[−63]…[4]…[63]
[B (PHASE)]
Corrects the blue hue.
[−63]…[0]…[63]
[B-Cy (PHASE)]
Corrects the hue between blue and cyan.
[−63]…[0]…[63]
[Cy (PHASE)]
Corrects the cyan hue.
[−63]…[12]…[63]
[Cy-G (PHASE)]
Corrects the hue between cyan and green.
[−63]…[15]…[63]
[G (PHASE)]
Corrects the green hue.
[−63]…[10]…[63]
[G-Yl (PHASE)]
Corrects the hue between green and yellow.
[−63]…[10]…[63]
[Yl (PHASE)]
Corrects the yellow hue.
[−63]…[6]…[63]
[Yl-Yl-R (PHASE)]
Corrects the hue between yellow and “colors between yellow and red”.
[−63]…[22]…[63]
[Yl-R (PHASE)]
Corrects the hue between yellow and red.
[−63]…[7]…[63]
[Yl-R-R (PHASE)]
Corrects the hue between “colors between yellow and red” and red.
[−63]…[13]…[63]
are factory settings.
fWhen saving or reading setup les from an SD memory card, you can save items with an [S] and items without an [S] separately. Items with an [S] in
front of the item name are the targets for [PAINT([S]SELECT)] in the main menu → [FILE] → [SETUP DATA SELECT]. Items without an [S] are targets
for [PAINT(LEVEL)].
[LOW SETTING]
Item Description of settings Remark
[[S] MASTER GAIN]
Selects the master gain.
[−6dB], [−3dB], [0dB], [3dB], [6dB], [9dB], [12dB], [15dB], [18dB], [21dB],
[24dB], [27dB], [30dB]
f [−6dB] in [[S] MASTER GAIN] cannot be selected
when [NORMAL] is set in main menu → [PAINT]
→ [[S] CAMERA SETTING] → [SHOOTING
MODE].
f A coloration phenomenon may occur in videos
of high-brightness areas if shooting was done
with the master gain set to [−6dB] or [−3dB].
After switching the <OUTPUT>/<AUTO KNEE>
selection switch to <CAM>/<OFF> and setting
[ON] in the main menu → [PAINT] → [KNEE/
LEVEL] → [[S] MANUAL KNEE], you can reduce
the coloration phenomenon by changing the
following menu items:
- Reduce the [KNEE MASTER SLOPE] value of
[KNEE/LEVEL] when [HD], [SD], [FILMLIKE1],
[FILMLIKE2], or [FILMLIKE3] is selected in the
main menu → [PAINT] → [GAMMA] → [GAMMA
MODE SEL].
- Reduce the [F-REC DYNAMIC LVL] value of
[GAMMA] when [FILM-REC] is selected in main
menu → [PAINT] → [GAMMA] → [GAMMA
MODE SEL].
- Reduce the [V-REC KNEE SLOPE] value of
[GAMMA] when [VIDEO-REC] is selected in the
main menu → [PAINT] → [GAMMA] → [GAMMA
MODE SEL].
[H.DTL LEVEL]
Sets the horizontal detail correction level.
[0]…[12]…[63]
[V.DTL LEVEL]
Sets the vertical detail correction level.
[0]…[15]…[31]
[DTL CORING]
Sets the detail noise removal level.
[0]…[1]…[60]
[H.DTL FREQ.]
Selects the horizontal detail frequency.
[0]…[18]…[31]
[LEVEL DEPEND.]
Sets [LEVEL DEPEND.].
Compresses the details of dark areas when Y detail is emphasized.
Details of bright areas are also compressed if the value is large.
[0], [1]…[5]
[MASTER GAMMA]
Sets the master gamma in 0.01 steps.
[0.30]…[0.45]…[0.75]
[BLACK GAMMA] Sets the gamma curves of dark areas.
[−8]…[−1]
Compresses the dark areas.
[OFF] Standard state
[1]…[8] Expands the dark areas.
[B. GAMMA RANGE] Sets the maximum level of compression/expansion.
[1] About 20%
[2] About 30%
[3] About 40%
[[S] MATRIX TABLE]
Selects the color collection table for the linear matrix.
[A], [B], [OFF]
[[S] COLOR
CORRECT]
Switches the 15-axis independent color correction on/off.
[ON], [OFF]
are factory settings.
fWhen saving or reading setup les from an SD memory card, you can save items with an [S] and items without an [S] separately. Items with an [S] in
front of the item name are the targets for [PAINT([S]SELECT)] in the main menu → [FILE] → [SETUP DATA SELECT]. Items without an [S] are targets
for [PAINT(LEVEL)].
Find Your Products By Category
Please Login
