Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 152 –
Chapter 7 Menu Operations — Menu list
[AGC]
Item Description of settings Remark
[AGC]
Selects [ON]/[OFF] for [AGC] function that automatically adjusts camera gain.
[ON], [OFF]
[AGC LIMIT]
Sets the maximum gain value during [AGC] operation.
[3dB], [6dB], [12dB], [18dB]
[AGC POINT]
Sets the F value to switch control to [AGC] from auto iris during [AGC] operation.
[F5.6], [F4], [F2.8]
are factory settings.
[CLIP]
[PROPERTY]
Item Description of settings Remark
[CLIP PROPERTY] Detailed clip information is displayed on the screen. Items can be individually
corrected. For details, refer to “Properties” (page 119).
[CARD STATUS] Displays the card status of a card slot. For details, refer to “Thumbnail screen”
(page 108).
[CPS PASSWORD] Sets the CPS encrypted password of the microP2 memory card.
[LOAD] Loads the CPS password from the SD memory card.
[SET] Enter the CPS password.
[DELETE] Deletes the password saved to the device, and disables
encrypted formats.
[SD CARD] Displays SD memory card information.
[REMAIN SETUP] Sets which is displayed, remaining capacity or used capacity, when P2 card
information is displayed.
[REMAIN] Displays remaining capacity.
[USED] Displays used capacity.
[FREE CAP. OF
PARTITION]
Displays available space in a partition. f Displayed only in storage explorer when in USB
storage mode.
are factory settings.
Item Description of settings Remark
[REPOSITION] Selects a clip to be displayed on the thumbnail screen.
[ALL CLIP] Displays all clips as thumbnails.
[SAME
FORMAT
CLIPS]
Displays only the clips recorded in the same format as the
system format as thumbnails.
Clips recorded in the same format means that each item of
[LINE&FREQ], [REC FORMAT], and [AUDIO SMPL RES] in
the main menu → [SYSTEM] → [SYSTEM MODE] matches the
current setting status.
Example) [1080-59.94i], [AVC-I100], [24BIT]
[SELECTED
CLIPS]
Displays only the clips selected with the <SET> button as
thumbnails. The thumbnails appear in selected order.
[MARKED
CLIPS]
Displays only the clips with shot marks added as thumbnails.
[TEXT MEMO
CLIPS]
Displayed only clips with text memo data attached as
thumbnails.
[SLOT CLIPS] Displays only the clips of the selected slot as thumbnails.
[DELETE] Deletes selected clips. f To interrupt the deletion process, press the
<SHIFT> button + <EXIT> button, or the <SET>
button to cancel the operation. Once a clip is
deleted, it cannot be restored even if the deletion
process is aborted.
[FORMAT] When the [FORMAT] menu is selected, format the P2 card of the specied slot. f Data deleted as a result of formatting cannot be
restored. Always check the data before formatting.
[FORMAT(STORAGE)]
Formats a storage device connected to the <USB3.0> terminal (host) using the
specied system in USB storage mode.
[TYPE S], [FAT]
f Data deleted as a result of formatting cannot be
restored. Always check the data before formatting.
f Enabled only for storage explorer, storage
thumbnail.
[COPY] Copies the selected clip to a P2 card in any card slot or a storage device. f Do not turn power off or remove the card during
copying. Doing so will result in defective clips. If
a defective clip is created, delete the clip before
copying it again.
f Combine incomplete clips before copying.
are factory settings.

   Find Your Products By Category