Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 90 –
Chapter 4 Adjustments and Settings for Recording — Handling setting data
4
Adjust the lens aperture so that the white window in the center of the grayscale chart is about 80%.
5
Press the <AUTO W/B BAL> switch towards <AWB>.
White balance is automatically adjusted.
6
Measure the signal level of RGB in the waveform monitor.
7
Replace the lens with the one to be used for creating the lens file.
8
Fine-adjust the lens aperture so that the signal level of Gch becomes the same as the signal level obtained in step 6.
9
Set [ON] in the main menu → [MAINTENANCE] → [LENS FILE ADJ] → [LENS FILE ADJ MODE].
10
Adjust so that the signal level of Rch becomes the same as Gch in the main menu → [MAINTENANCE] → [LENS FILE ADJ] →
[LENS R GAIN OFFSET].
11
Likewise, adjust [LENS B GAIN OFFSET] so that the signal level of Bch becomes the same as Gch.
Writing lens les to internal memory
1
Select [SAVE] in the main menu → [FILE] → [LENS FILE], and press the jog dial button (or <SET> button).
The list of lens les currently saved in camera memory is displayed.
2
Select the file to write from the list.
The title entry screen and keyboard are displayed.
3
Enter the desired characters with the keyboard.
4
Use the jog dial button (or cursor buttons `/{/Y/I) to select [OK], and press the jog dial button (or <SET> button).
The conrmation screen is displayed.
5
Select [YES], and press the jog dial button (or <SET> button).
The le is saved and the le list is updated.
Reading lens les from internal memory
1
Select [LOAD] in the main menu → [FILE] → [LENS FILE], and press the jog dial button (or <SET> button).
The list of lens les currently saved in camera memory is displayed.
2
Select the file name to read, and press the jog dial button (or <SET> button).
The conrmation screen is displayed.
3
Select [YES], and press the jog dial button (or <SET> button).
Loading of the le begins.
4
When the completion message is displayed, press the jog dial button (or <SET> button).

   Find Your Products By Category