0
Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
– 58 –
Chapter 4 Adjustments and Settings for Recording — Selecting audio input and adjusting recording levels
Selecting audio input and adjusting recording levels
The camera supports independent 4-channel sound recording in all recording formats (HD, SD).
When the <AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4> switch is set to <AUTO>, the recording level of audio channels 1/2 (3/4 according to
the main menu → [I/F SETUP] → [MIC/AUDIO] → [VR SELECT]) is automatically adjusted. The recording level can also be manually adjusted by the
<AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dials or <F.AUDIO LEVEL> dial when the switch is set towards <MANU>. You can select whether to
adjust the recording level of audio channels 3/4 (1/2 according to [MIC/AUDIO] → [VR SELECT]) automatically or manually in [MIC/AUDIO] → [AUTO
LVL CH3(CH1)] and [AUTO LVL CH4(CH2)] (adjusted by [MIC/AUDIO] → [LVL CONTROL CH3(CH1)] and [LVL CONTROL CH4(CH2)]).
fOn the camera, you can select whether to adjust the audio level of channels 1/2 or channels 3/4 by the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL
CH2/4> dial. As the factory setting, the audio of channels 1/2 is set to be adjusted by the level adjustment dial.
fWith HD cards, too, four audio channels are recorded to P2 cards.
fWhen SDI input signals are recorded, the settings made here are disabled, and audio signals from the <SDI IN> terminal are recorded at all times.
Selecting audio input signals
By the <AUDIO IN> switch, select the input signal to be recorded to audio channel 1/2/3/4.
<AUDIO IN> switch
The input selection can be checked on the [AUDIO] screen of the mode check display.
D IA U O
AS M P L E ER S
REWOPCIM
TCELESRV
( M E N U
M E N U
A U T O
A U T O
F R O N
R E A R
T
)
2: 4 IB T
O: N
O: F F
C: H /3 4
L E V E L F . V R A .
.
I N M E T E R
RF N T : 1
2
W L .
.
W L .
:
V R O N R E A R : 3
: 4
Adjusting the recording levels
On the camera, adjustment of the recording level can be selected from three methods: adjustment dial, adjustment by menu items and automatic
adjustment. Select which two channels, [CH1/2] or [CH3/4], are to be assigned to the adjustment dial in the main menu → [I/F SETUP] → [MIC/AUDIO]
→ [VR SELECT]. The two channels not assigned to the adjustment dial are automatically adjusted. They can also be adjusted by the menu items.
[CH1/2] is assigned to the adjustment dial as the factory setting.
Selection of level adjustment method
At [VR SELECT], select which of [CH1/2] or [CH3/4], are to be assigned to the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial.
[CH1/2] Assigns the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial to channels 1/2. The <AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4>
switches are also enabled for channels 1/2.
Channels 3/4 are automatically adjusted. When [AUTO LVL CH3] and [AUTO LVL CH4] are set to [OFF] in the main menu → [I/F SETUP] →
[MIC/AUDIO], automatic adjustment is canceled and the level can also be adjusted by [LVL CONTROL CH3] and [LVL CONTROL CH4].
[CH3/4] Assigns the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial to channels 3/4. The <AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4>
switches are also enabled for channels 3/4.
Channels 1/2 are automatically adjusted. When [AUTO LVL CH1] and [AUTO LVL CH2] are set to [OFF] in the main menu → [I/F SETUP] →
[MIC/AUDIO], automatic adjustment is canceled and the level can also be adjusted by [LVL CONTROL CH1] and [LVL CONTROL CH2].
@@
NOTE
t The values of each item when [VR SELECT] is changed are carried over.
Find Your Products By Category
Please Login
