0
Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
– 151 –
Chapter 7 Menu Operations — Menu list
Item Description of settings Remark
[AWB AREA] Switches the detection area that automatically adjusts white balance.
[25%] Detects 25% of the area near screen center.
[50%] Detects 50% of the area near screen center.
[90%] Detects 90% of the screen area.
[AWB B] Sets the function assigned to the <WHITE BAL> switch <B>.
[MEM] Records setting values when white balance is automatically
adjusted, and operates using those values each time the
<WHITE BAL> switch is moved to <B>.
[ATW] Assigns the auto tracking white balance function.
[ATW SPEED]
Switches the control speed of auto tracking white balance function.
[NORMAL], [SLOW], [FAST]
[TEMP PRE SEL SW] Selects whether to set the preset color temperature to be variable or to switch
between [3200K]/[5600K]. Right after the value is changed, the preset color
temperature is set to [3200K] (when the lter <A> is set).
[VAR] Switchable from [< 2300K] to [> 15000K].
[3.2K/5.6K] Can be switched to [3200K] or [5600K].
[COLOR TEMP PRE]
Sets color temperature when the <WHITE BAL> switch is in the <PRST> position.
Sets the preset color temperatures selected in [TEMP PRE SEL SW].
When [VAR] is selected for [TEMP PRE SEL SW]:
[< 2300K]…[3200K]…[> 15000K]
When [3.2K/5.6K]is selected for [TEMP PRE SEL SW]:[3200K], [5600K]
f The range of color temperature that can be set
differs depending on the position of the <CC
FILTER> dial. When a high color temperature is
set, sometimes the value does not change even if
the color temperature is changed.
[AWB A TEMP]
Sets color temperature when the <WHITE BAL> switch is in the <A> position.
If the white balance is automatically adjusted in the <A> position, the color
temperature at that time is recorded to the <WHITE BAL> switch <A> position.
[< 2300K]…[3200K]…[> 15000K]
[AWB B TEMP]
Sets color temperature when the <WHITE BAL> switch is in the <B> position.
If the white balance is automatically adjusted in the <B> position, the color
temperature at that time is recorded to the <WHITE BAL> switch <B> position.
[< 2300K]…[3200K]…[> 15000K]
are factory settings.
[USER SW GAIN]
Item Description of settings Remark
[S.GAIN] Selects the gain to enable to the <SUPER GAIN> switch (<USER> button).
[30dB], [36dB], [42dB]
f Set to be valid/invalid per gain value. All gain
values are valid in the factory settings.
[DS.GAIN] Selects the accumulated gain to enable to the <DS.GAIN> switch (<USER>
button).
[6dB], [10dB], [12dB], [15dB], [20dB], [24dB], [28dB], [34dB]
f Set to be valid/invalid per gain value. The gain
value of [20dB] or lower is valid in the factory
setting.
f When [DS.GAIN] function is operating, the shutter
mode is [OFF].
are factory settings.
[LENS/IRIS]
Item Description of settings Remark
[A.IRIS LEVEL]
Sets the auto iris target value.
[0]…[50]…[100]
[A.IRIS PEAK/AVE]
Sets the ratio included in the peak for auto iris standard.
Larger ratios correspond to a peak within the IRIS detection window, and smaller
ones correspond to average values within the IRIS detection window.
[0]…[30]…[100]
[A.IRIS WINDOW] Selects the auto iris detection window.
[NORM1] Window that is near screen center.
[NORM2] Window that is near screen bottom.
[CENTER] Window that is a spot in the screen center.
[S.IRIS LEVEL]
Sets the super iris (backlight compensation) target value.
[0]…[70]…[100]
[IRIS GAIN]
Selects the IRIS GAIN adjustment side.
[CAM], [LENS]
f When using the lenses with extenders (such as
x2 and x0.8) sold prior to the FUJINON DIGI
POWER types, set to [LENS] with the extender
inserted, and operate IRIS correction control. If
set to [CAM], the IRIS control of the camera will
no longer function correctly.
[IRIS GAIN VALUE]
Selects the [IRIS GAIN] adjustment value.
When [CAM] is selected in [IRIS GAIN], this setting is enabled.
[1]…[10]…[20]
are factory settings.
Find Your Products By Category
Please Login
