Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 22 –
Chapter 2 Description of Parts — Shooting and recording/playback functions section
11
30 32 333129
26
27
24
12 13
15
28
20 21 22 23
25
17
14
16
18
18
19
r Shooting and recording/playback functions section (Recording unit)
11 <REC> button (page 37)
Recording is started by pressing this button. Recording is stopped by pressing this button again.
This button has the same function as the VTR button on the lens side.
12 <SHOT MARKER> button (page 39)
fShot marks can be added to the thumbnail of a clip while that clip is being recorded. Thumbnails can also be selected in the LCD monitor, and shot
marks can be added by pressing this button.
fThe selected function can be assigned as the <USER3> button. Set the function to be assigned in the main menu → [CAMERA] → [USER SW] →
[SHOT MARK (U3)].
13 <TEXT MEMO> button (page 40)
fText memos can be recorded by pressing this button during recording/playback or while playback is paused.
fThe selected function can be assigned as the <USER4> button. Set the function to be assigned in the main menu → [CAMERA] → [USER SW] →
[TEXT MEMO (U4)].
14 P2 memory card access LED (page 32)
Indicate the access status of recording and playback of each card.
15 P2 memory card slot
16 Busy (active status indication) lamp (page 86)
Indicate the active status of the SD memory card, and is illuminated when the card is active.
@@
NOTE
t Do not insert or remove the card while the lamp is lit. This might damage the SD memory card.
17 SD memory card slot (page 86)
This is the insertion slot for the SD memory card (optional). Use the SD memory card for recording/opening the setting menu and lens les for the
camera, or uploading metadata or proxy recording, etc.
@@
NOTE
t Cautions when using SD memory cards
- On the camera, use SD memory cards that conform to the SD standard, SDHC standard, or the SDXC standard. When performing proxy
recording, use SDHC memory cards, SDXC memory cards, or SD memory cards with the class description of class2 or higher.
- MMC (Multi Media Card) cannot be used. (Bear in mind that taking pictures may no longer be possible if you use them.)
- When using miniSD/microSD cards with the camera, always install the adaptor specially designed for miniSD/microSD cards. (The camera will
not work properly if only the miniSD/microSD adaptor is installed. Make sure that the card has been inserted into the adaptor before use.)
- Use of Panasonic SD memory cards and miniSD/microSD cards is recommended. Be sure to format cards on the camera before use.
- Refer to our support desk at the following website for the latest information not included in these operating instructions.
http://pro-av.panasonic.net/
- SDHC memory cards are a standard that was established in 2006 by the SD Association for large-capacity memory cards that exceed 2 GB.
- SDXC memory cards are a standard that was established in 2009 by the SD Association for large-capacity memory cards that exceed 32 GB.
18 microP2 memory card access LED (page 32)
Indicates the access status of recording and playback of each microP2 memory card.
19 microP2 memory card slot

   Find Your Products By Category