0
Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
– 30 –
Chapter 3 Recording and Playback — Setting the date/time of the internal clock
Setting the date/time of the internal clock
The value of the time is recorded to content (clips) and affects the thumbnail playback order. Before recording, be sure to check and set the date and
time zone.
1
Set the <DISPLAY> switch to <UB>.
2
Press the <HOLD> button several times to display the time zone (time difference from Greenwich mean time) on the display
window.
For time zone display, refer to “Time code indications” (page 27) in “Description on display window”.
3
Set the <TCG> switch to <SET>.
4
Set hours/minutes (h/min) and advance (no display)/delay ([−] display) from the Greenwich mean time by the cursor buttons (`/
{).
Example) Time difference 5:00 delay (New York)
Set as [05:00 −].
The time zones are always recorded as metadata together with date/time.
Set this matched to the local time by referring to the time zone table.
5
Set the <TCG> switch to <F-RUN> or <R-RUN> to apply the time zone.
6
Press the <HOLD> button several times to display [DATE] on the display window.
7
Set the <TCG> switch to <SET>.
8
Set date (Y/M/D) by the cursor buttons.
The year setting upper limit is 2037.
I: The digit to be set (ashing) moves to the right.
Y: The digit to be set (ashing) moves to the left.
`: The value of the ashing digit is incremented by one.
{: The value of the ashing digit is decremented by one.
9
Press the <HOLD> button to display [TIME] on the display window.
10
Set hours/minutes/seconds (h/min/s) by the cursor buttons.
11
Set the <TCG> switch to <F-RUN> or <R-RUN>.
When this switch is switched, the internal clock starts to operate.
r Time zone table
Time
difference
Region Time
difference
Region Time
difference
Region Time
difference
Region
00:00 Greenwich
−06:30 +01:00
Central Europe
+07:30
−00:30 −07:00
Denver
+01:30 +08:00
Beijing
−01:00
Azores
−07:30 +02:00
Eastern Europe
+08:30
−01:30 −08:00
Los Angeles
+02:30 +09:00
Tokyo
−02:00
Mid-Atlantic
−08:30 +03:00
Moscow
+09:30
Darwin
−02:30 −09:00
Alaska
+03:30
Tehran
+10:00
Guam
−03:00
Buenos Aires
−09:30
Marquesas Islands
+04:00
Abu Dhabi
+10:30
Lord Howe Island
−03:30
Newfoundland
−10:00
Hawaii
+04:30
Kabul
+11:00
Solomon Islands
−04:00
Halifax
−10:30 +05:00
Islamabad
+11:30
Norfolk Island
−04:30 −11:00
Midway Islands
+05:30
Bombay
+12:00
New Zealand
−05:00
New York
−11:30 +06:00
Dakar
+12:45
Chatham Islands
−05:30 −12:00
Kwajalein Atoll
+06:30
Yangon
+13:00
−06:00
Chicago
+00:30 +07:00
Bangkok
@@
NOTE
t Be sure to make this setting before using the camera for the rst time. After, do not change the setting during use.
t Thumbnail operations and menu operations on thumbnail operation section are not possible while the <TCG> switch is set to <SET>.
t After setting year/month/day in step
8, the internal clock will start if the <TCG> switch is set to <F-RUN> or <R-RUN>.
t To cancel settings while setting year/month/day, hours/minutes/seconds and time zone, set the <TCG> switch to <F-RUN> or <R-RUN> with the
<SET> button held down.
t Clock accuracy is a lunar inequality of approximately ±30 seconds with the power off. When accurate time is required, check and reset the time when
the power is turned on.
t The built-in clock runs for several years on the camera’s built-in lithium cell. When the lithium cell runs low, [BACKUP BATT EMPTY] will be displayed
in the viewnder when the camera is turned on. For details, refer to “Maintenance” (page 193).
Find Your Products By Category
Please Login
