Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 27 –
Chapter 2 Description of Parts — Description on display window
Description on display window
2
1
3
r P2 card, battery charge level, audio level display
1 Media remaining space indicator bar
Indicates the remaining free space in the P2 card using a 7-segment display.
The P2 card remaining time indicated by a single segment is set in three or ve minutes in the main menu → [I/F SETUP] → [BATTERY/P2CARD]
→ [CARD REMAIN/Seg]. Segments go out one segment at a time at each preset time.
2 Battery charge level indicator bar
When a battery with a digital indication (% indication) is used, all seven segments up to the [F] position light if the battery charge level is 70% or
higher.
When the battery charge level falls below 70%, the segments go out one by one for each 10% drop. When set [100%] in the main menu → [I/F
SETUP] → [BATTERY/P2CARD] → [BATT REMAIN FULL], seven segments can be set to light at 100%.
3 Audio channel level meter
When the audio channel selector switch is set to <CH1/2>, audio channel display numbers 1 and 2 are displayed, and the audio level of CH1 and
CH2 is displayed. When <CH3/4> is set, audio channel display numbers 3 and 4 are displayed, and the audio level of CH3 and CH4 is displayed.
5
4
r Memory operation/status related display
4 Error code display (page 196)
5 Information display
[LOOP] Lights during loop recording, and ashes during recording standby. (page 38)
6
7
6 Time code indications
[NDF] Indicates when the time code is in the non-drop frame mode.
[DF] Indicates when the time code is in the drop frame mode.
[SLAVE] Indicates when the time code is externally locked.
[HOLD] Indicates when the time code generator/read value is held.
[CTL] Lights when <CTL> is selected by the <DISPLAY> switch and the CTL count value is displayed.
[TCG] Lights when <TC> (or <UB>) is selected by the <DISPLAY> switch and the TC (or UB) generator value is displayed.
[TC] Lights when <TC> (or <UB>) is selected by the <DISPLAY> switch and the TC (or UB) reader value is displayed.
[VTCG] Lights when <UB> is selected by the <DISPLAY> switch and the VIUB generator value is displayed.
[VTC] Lights when <UB> is selected by the <DISPLAY> switch and the VIUB reader value is displayed.
[TIME] Lights when <UB> is selected by the <DISPLAY> switch and the real time hours/minutes/seconds value is displayed.

   Find Your Products By Category