Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 75 –
Chapter 4 Adjustments and Settings for Recording — Viewnder status display
24 Focus control information
Displays the focus control information with [99] to [00]. When a lens other than a serial lens is connected, the focus control information is not
displayed. When a serial lens is connected, the display unit can be changed in the main menu → [VF] → [VF INDICATOR] → [ZOOM/FOCUS].
25 Information display such as pre-recording
[P-REC] (ashing)
Displayed after recording is stopped and until recording of video/audio to P2 card completely stops. Do not remove the P2 card
or turn the power off until the ashing indication completely goes out.
f When the pre-recording function is set to [OFF], [REC] ashes.
[P-REC *s/OFF]
(illuminated)
Illuminated if the <MARKER SEL>/<MODE CHECK/MENU CANCEL> switch is pushed towards the <MCK/MCL> side when the
pre-recording function is set to [ON]. The status is displayed when the <USER> button where [PRE REC] is assigned is pressed
to switch to the pre-recording mode.
26 Gamma mode display
Displays the gamma mode currently selected by [GAMMA MODE SEL] in the main menu → [PAINT] → [GAMMA].
[HD]/[SD]/[FLK1]/[FLK2]/[FLK3]/[FREC]/[VREC]
27 Lock status display of auto tracking white balance
Displayed when the <USER> button where [ATW LOCK] is assigned is pressed and the color temperature is xed while auto tracking white balance
is active.
28 Type of marker
Displays the type of currently displayed marker.
[MKR:A/B/OFF]
29 Y GET brightness display
In the Y GET mode, the image level in the frame displayed near the center of the screen is displayed as 0% to 109%.
30 High-sensitivity mode display
Displayed when set [HIGH SENS.] in the main menu → [PAINT] → [[S] CAMERA SETTING] → [SHOOTING MODE].
31 Flash band compensation (FBC) function display
Displayed when the ash band compensation function is activated.
32 Chromatic aberration compensation
[CAC] Displayed when the chromatic aberration compensation function is active.
33 Battery charge level/voltage
[**.*V]
Displays the battery charge level in 0.1 V units.
[***%]
Displays the charge level of batteries with charge level information in %.
[EMP] Displayed when there is no charge level on batteries with charge level information or the level is at the near end setting value or
below.
[MAX] Displayed when batteries with charge level information are fully charged.
34 P2 card remaining free space
[ ]
This is the slot No. This is displayed in black and white inversion when the slot No. is recording destination. It ashes while the
card is being recognized.
[***min]
Displays the remaining space on the media in each slot. During a near end, it ashes.
0 to 599 indicates minutes, while 600 minutes or longer indicates hours.
(No display) Not displayed when a card is not inserted.
[END] Displayed when there is no space remaining on each card.
[WP] Displayed when the P2 card is write-protected.
[ERR] Displayed in the case of format errors or authentication errors.
[LOOP ***min]
Displayed when the loop recording mode is set. During the mode check, the 2nd line displayed the standard recording time of
loop recording.
[LOOP] ashes when loop recording is not possible, for example, when there is no more space remaining on the P2 card.
35 Recording media display
From among P2 and microP2 memory card slots, displays the slots that can be used for recording/playback, which is set in the main menu → [REC/
PB] → [REC/PB SETUP] → [REC MEDIA].
[P2] P2 memory card slot
[mP2] microP2 memory card slot
36 System mode
Displays the mode in which the camera is operating.
[1080-59.94P] 1080/59.94 progressive mode
[1080-59.94i] 1080/59.94 interlaced mode
[1080-50P] 1080/50 progressive mode
[1080-50i] 1080/50 interlaced mode
[480-59.94i] 480/59.94 interlaced mode
[576-50i] 576/50 interlaced mode
37 Recording operation status display
[REC]
Displayed when set [CHAR] in the main menu → [REC/PB] → [REC/PB SETUP] → [REC TALLY]. This is also displayed when
set [ON] in the main menu → [VF] → [VF INDICATOR] → [REC STATUS].

   Find Your Products By Category