Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 195 –
Chapter 9 Maintenance and Inspection — Warning system
6 Recording error
Display in display window Does not display.
Warning lamp Flashes four times per second during continuous recording.
Tally lamp Flashes four times per second during continuous recording.
Viewnder
The [REC WARNING] display and rows beneath display the cause.
f Displayed only while the error occurs during recording. However, it is retained for at least three seconds.
f When recording stops due to an error, it is displayed until the P2 card operates.
f [TEMPORARY PAUSE] may be displayed instead of [REC WARNING]. For details, refer to “Warning information
display” (page 196).
Alarm Sounds four times per second during continuous recording.
Warning content This is a recording or recording circuit setting error.
Recording or playback operation Recording may be continued or stopped.
Action to take Start recording again. Or, turn the power off once and then start recording again.
7 Card error
Display in display window Does not display.
Warning lamp
If the error occurs during recording, it ashes four times per second for approx. three seconds after recording stops.
It does not ash when it occurs during playback.
Tally lamp
If the error occurs during recording, it ashes four times per second for approx. three seconds after recording stops.
It does not ash when it occurs during playback.
Viewnder
[CARD ERROR] (slot number) is displayed.
f When recording stops due to an error, it is displayed until the P2 card operates.
f Displayed when it occurs during playback. (for at least three seconds)
Alarm
If the error occurs during recording, it sounds four times per second for approx. three seconds after recording stops.
It does not sound when it occurs during playback.
Warning content A P2 card error occurred during recording or playback.
Recording or playback operation The current operation will stop. After it stops, the P2 card for which the error occurred is write-protected.
Action to take Replace the P2 card.
8 Reduced wireless audio reception
Display in display window Does not display.
Warning lamp Flashes four times per second. (When idle or during recording)
Tally lamp Flashes four times per second during continuous recording.
Viewnder The [WIRELESS RF] display illuminates.
Alarm Sounds four times per second during continuous recording.
Warning content The error indicates poor wireless audio reception conditions.
Recording or playback operation The current operation will continue.
Action to take Check the microphone power supply and the reception status of the receiver.
9 Battery near end
Display in display window One battery charge level bar ashes.
Warning lamp Flashes once per second.
Tally lamp Flashes once per second.
Viewnder The [BATT] lamp ashes once per second if the viewnder has the [BATT] lamp.
Alarm Sounds four times per second.
Warning content The battery is about to run out.
Recording or playback operation The current operation will continue.
Action to take Change the batteries as needed.
10 P2 card recording near end
Display in display window One P2 card remaining capacity bar ashes.
Warning lamp Flashes once per second during continuous recording.
Tally lamp Flashes once per second during continuous recording.
Viewnder
The remaining P2 card capacity indicator ashes.
(If the viewnder has the [SAVE] lamp, and [P2CARD] is set in the main menu → [VF] → [VF INDICATOR] → [SAVE
LED], the [SAVE] lamp ashes once per second (during recording, while recording pauses and stops)).
Alarm Sounds once per second during continuous recording.
Warning content The P2 card memory free space totals 2 minutes or less.
Recording or playback operation The current operation will continue.
Action to take Change the P2 card or insert an additional card as needed.
11 Fan stop
Display in display window Does not display.
Warning lamp Flashes four times per second.
Tally lamp Does not display.
Viewnder The [FAN STOPPED] display is illuminated at all times.
Alarm Does not sound.

   Find Your Products By Category