Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 168 –
Chapter 7 Menu Operations — Menu list
[SYSTEM]
[SYSTEM MODE]
Item Description of settings Remark
[LINE&FREQ] Sets the system number of lines and frequency, recording format, and audio
quantizing bit quantity. When the number of lines and frequency are selected,
only the items that can be selected for those frequencies are displayed. If the
frequency is changed, the device must be restarted. If a restart is required, a
conrmation dialog will be shown.
f The setting values are saved together with the
settings of [REC FORMAT] and [AUDIO SMPL
RES] on each setting of [LINE&FREQ]. When
the settings of [LINE&FREQ] are restored to the
previous settings, these items are reset to the
previous settings at the time.
[1080-59.94P] Selects the number of lines 1080P and system frequency
59.94 Hz.
[1080-50P] Selects the number of lines 1080P and system frequency
50 Hz.
[1080-59.94i] Selects the number of lines 1080i and system frequency
59.94 Hz.
[1080-50i] Selects the number of lines 1080i and system frequency 50 Hz.
[480-59.94i] Selects the number of lines 480i and system frequency
59.94 Hz.
[576-50i] Selects the number of lines 576i and system frequency 50 Hz.
[REC FORMAT] Select the recording codec. f [AVC-G50] and [AVC-G25] cannot be selected in
the following cases.
- When the main menu → [REC/PB] → [REC
FUNCTION] → [RECORDING] is set to other
than [NORMAL]
[AVC-I100] Selects AVC-Intra 100.
[AVC-I50] Selects AVC-Intra 50.
[AVC-G50] Selects AVC-LongG 50.
[AVC-G25] Selects AVC-LongG 25.
[DVCPRO HD] Selects DVCPRO HD (100 Mbps).
[DVCPRO50] Selects DVCPRO50 (50 Mbps).
[DVCPRO] Selects DVCPRO (25 Mbps).
[DV] Selects DV (25 Mbps).
[AUDIO SMPL RES] If the recording format is AVC-Intra 100/AVC-Intra 50, selects number of the audio
recording quantizing bits.
f When the recording format is AVC-LongG 50
or AVC-LongG 25, select [24BIT]. When the
recording format is DVCPRO HD, DVCPRO50,
DVCPRO, or DV, select [16BIT].
f Clips recorded at 24-bit should be played back
using a 24-bit compatible P2 device or P2 Viewer
Plus. The clip numbers of P2 devices that are
not 24-bit compatible are displayed in red and
cannot be used for playback. Audio does not play
back correctly on a P2 Viewer that is not 24-bit
compatible. Always use the latest P2 Viewer Plus
version.
f For 24-bit compatible P2 devices and the latest
P2 Viewer Plus information, visit the P2 support
page on the following website.
http://pro-av.panasonic.net/
[16BIT] 16-bit is the audio recording bit quantity.
[24BIT] 24-bit is the audio recording bit quantity.
[REC SIGNAL] Switches the video input signal. f Once the power is turned off, it is always set to
[CAM] the next time power is turned on.
[CAM] Record signal from the camera
[SDI] Record input from the <SDI IN> terminal
[ASPECT] Selects the aspect ratio to record. (Only in SD)
[16:9] Recorded using the 16:9 aspect ratio.
[4:3] Recorded using the 4:3 aspect ratio.
[SCAN REVERSE] Sets whether to use function to correct video when using an anamorphic lens or
lm lens.
[ON] Corrects video. Inverts the top, bottom, left and right sides of a
video.
[OFF] Does not correct video.
are factory settings.
[SYSTEM SETUP]
Item Description of settings Remark
[SETUP(7.5%)] Switches the setup.
[ON] Setup 7.5% is on.
[OFF] Setup 7.5% is off.
[P.OFF LCD DISPLAY] Selects whether to set the time code of window display or display the count when
the power is off.
[ON] Sets and displays time code even when the power is off.
[OFF] Settings and display on the display window are not available
while the power is off.
are factory settings.

   Find Your Products By Category