Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 41 –
Chapter 3 Recording and Playback — Proxy recording
Proxy recording
The camera supports high-resolution proxy video recording.
The materials recorded with the camera can be converted to a compressed data le to save into a different area than that of the original materials. Refer
to “Multi formats” (page 47) for information on the recording format where proxy recording is available.
Video can be saved in high-resolution H.264/AVC format as well as MPEG4 format. For audio, besides AAC format, uncompressed audio (LPCM) is
supported.
In addition to the traditional MPEG4 format, the MOV format more suitable for nonlinear editing is available.
Video les, audio les, and real-time metadata le (time code, user bits) can be recorded to the P2 card and SD memory card at the same time.
The recorded materials can be saved as a smaller data le to allow efcient clip check or editing.
Proxy settings
Setting menu
To record proxy data on the camera, set → [REC/PB] → [PROXY SETUP].
Item Description of settings Remark
[REC MEDIA] Selects media for recording proxy data.
—
[P2] Records proxy data to the P2 card.
[P2&SD] Records proxy data to both the P2 card and SD memory card.
[OFF] Does not record proxy data.
[REC MODE (HD)]
Sets the proxy data recording mode (in the HD mode).
For details on each mode, refer to “Recording modes and recording signals (video/audio)”
(page 41).
[STD 2CH MP4], [SHQ 2CH MOV], [HQ 4CH MOV], [HQ 2CH MOV], [LOW 2CH MOV]
—
[TC SUPER] Sets whether to superimpose time code display on the proxy data recorded images.
—
[UPPER] Superimposes the time code display at the top of the recorded images.
[LOWER] Superimposes the time code display at the bottom of the recorded
images.
[OFF] Does not superimpose time code display on recorded images.
[PROXY DISP] Sets whether to display proxy information.
—[ON] Displays a message.
[OFF] Does not display a message.
are factory settings.
fProxy data cannot be recorded in the following modes.
- Loop recording
- In SD mode (480/59.94i, 576/50i)
Checking the setting status
Push the <MODE CHECK/MENU CANCEL> switch on the camera towards the <MCK/MCL> side three times to check the menu values of [REC
MEDIA], [REC MODE (HD)], and [TC SUPER] with the mode check function.
Checking the version information
The version of proxy recording software on the camera can be displayed in the main menu → [SYSTEM] → [VERSION] → [PROXY SOFT].
Recording modes and recording signals (video/audio)
r Video
Recording mode File format Resolution Codec Frame rate Bitrate
[STD 2CH MP4] MP4
320×240 (QVGA)
MPEG-4
Simple Prole
30 fps/24 fps/25 fps 1500 kbps
[SHQ 2CH MOV] MOV
960×540
H.264
High Prole
30 fps/25 fps 3500 kbps
[HQ 2CH MOV] MOV
640×360
H.264
High Prole
30 fps/25 fps 1500 kbps
[HQ 4CH MOV] MOV
640×360
H.264
High Prole
30 fps/25 fps 1500 kbps
[LOW 2CH MOV] MOV 1080i mode
480×270
H.264
Baseline Prole
30 fps/25 fps 800 kbps
1080/59.94P mode
320×180
1080/50P mode
320×180
60 fps/50 fps
r Audio
Recording mode File format Codec Number of channels Bitrate per channel Sampling frequency
[STD 2CH MP4] MP4 AAC-LC 2ch 64 kbps 24 kHz

   Find Your Products By Category