Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 109 –
Chapter 6 Thumbnail Operations for Clips — Thumbnail operations
[META DATA] Displays the set metadata.
4 Simple properties display
This displays the various properties of the clip on which the pointer is positioned. You can select the items to display from the menu. For details, refer
to “Properties” (page 119).
@@
NOTE
t If the maximum number of characters is exceeded, it will only display the maximum number of characters that can be displayed.
5 Thumbnail
Displays the thumbnail recorded in each clip. This thumbnail can be changed using the [EXCH. THUMBNAIL] function.
For details, refer to “Thumbnail screen display settings” (page 111).
6 Clip information display
Displays any one of the time code [TC] at the start of clip recording/user bits [UB] at the start of clip recording/shooting time [TIME]/shooting date
[DATE]/shooting date and time [DATE TIME]/clip name [CLIP NAME]/user clip name [USER CLIP NAME]/card slot number [SLOT]/time cord of the
thumbnail [THUMBNAIL TC] according to the setting.
7 Recording mode
Displays the recording mode for the clip on which the cursor is positioned.
8 System format
Displays the format for the clip on which the cursor is positioned.
9 Duration
Displays the clip length (duration) at the cursor position and the current rough playback position against the clip length.
The playback position display is enabled when [RESUME] is selected in the main menu → [CLIP] → [THUMBNAIL SETUP] → [PB POSITION].
The approximate playback position is displayed when the playback start position is not at the beginning.
10 Number of selected clips
Shows the number of selected clips and the total number of clips.
11 Clip number
The number assigned to the clip on the P2 card is displayed, normally in the order from the earliest recording date and time. The clip numbers of
clips that cannot be played are shown in red, and the unplayable indicator [
] is also displayed.
For details, refer to “Thumbnail screen display settings” (page 111).
12 [
] Shot mark indicator
Displayed for the clip of a thumbnail with a shot mark attached.
For details, refer to “Shot mark recording function” (page 39).
13 [
] Indicator for clips with proxy
Displayed for clips with proxy attached.
14 [
] Text memo indicator
Displayed for clips with text memo data attached.
15 [
] Edit copied clip indicator
Displayed for the edit copied clip.
16 [
] Wide clip indicator
Displayed for clips recorded with the 16:9 aspect ratio. However, it does not accompany clips in HD format.
17 [
] Incomplete clip indicator
This is displayed when clips are saved across multiple P2 cards and either of the P2 cards is not inserted in a card slot.
18 [
] Defective clip indicator/[ ] Unknown clip indicator
This is displayed for defective clips, which may result from various causes such as turning off the power during recording.
Clips with yellow defective clip indicators can sometimes be restored.
For details, refer to “Restoring clips” (page 115).
Clips with red defective clip indicators cannot be restored and must be deleted. If the clip cannot be deleted, format the P2 card.
[
] is displayed for clips which differ in format from the P2 standard.
19 Thumbnail scroll bar
Indicates which part of the whole thumbnail is currently being viewed.

   Find Your Products By Category