Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 143 –
Chapter 7 Menu Operations — Menu list
[VF]
[VF DISPLAY]
Item Description of settings Remark
[VF/LCD CHAR] Selects whether to display a character on the image of the LCD monitor and
viewnder.
[ON] Displays a character on both the viewnder and LCD monitor.
[VF-OFF] Does not superimpose on the viewnder, and displays on the
LCD monitor.
[LCD-OFF] Does not superimpose on the LCD monitor, and displays on the
viewnder.
[VF MODE] Selects a viewnder image. f This item is enabled when [CAM] is set in the
main menu → [SYSTEM] → [SYSTEM MODE]
→ [REC SIGNAL]. When [SDI] is set, playback
images are output in the playback mode
regardless of this setting.
[MEM] In playback mode, these are playback images.
[CAM] Always camera images.
[VF COLOR] Selects whether to display viewnder images in color or in black and white.
[ON] Displays in color.
[OFF] Displays in black and white (playback images, thumbnail
screens and menu displays remain in color).
[DISP CONDITION] Selects the status display method.
[NORMAL] Status is always displayed.
[HOLD] Normally, status is not displayed. Push the <MARKER
SEL>/<MODE CHECK/MENU CANCEL> switch towards the
<MCK/MCL> side to display when the mode check screen is
displayed.
[DISP MODE]
Shows/hides camera warning/notication displayed in the center of the viewnder.
For details, refer to “Display modes and setting changes/adjustment result
messages” (page 79).
[1], [2], [3]
[VF OUT] Selects the image signal displayed on the viewnder screen.
[Y] Luminosity signal
[NAM] Outputs the [R], [G] or [B] signal with the largest level.
[R] Rch signal
[G] Gch signal
[B] Bch signal
[VF DTL]
Sets the detail level of the viewnder screen.
Further emphasizes details of the viewnder signal. If [0], the detail is the same as
this line.
[0]…[5]…[10]
[ZEBRA1 DETECT]
Sets the ZEBRA1 extraction level (IRE value).
[0%]…[70%]…[109%]
[ZEBRA2 DETECT]
Sets the ZEBRA2 extraction level (IRE value).
[0%]…[85%]…[109%]
[ZEBRA2]
Switches [ZEBRA2] [ON]/[OFF] and selects SPOT.
[ON], [SPOT], [OFF]
[LOW LIGHT LVL]
Sets how low the amount of light entering the camera must be to display [LOW
LIGHT].
[OFF], [10%], [15%], [20%], [25%], [30%], [35%]
[RC MENU DISP.]
Sets whether to display the menu on the viewnder screen when the remote
control unit or extension control unit is connected.
[ON], [OFF]
[MARKER/CHAR LVL]
Congures settings for the viewnder marker and character luminosity.
[50%], [60%], [70%], [80%], [90%], [100%]
[SYNCHRO SCAN
DISP]
Sets the unit in which synchro scan mode is displayed.
[sec] Displays in time.
[deg] Displays at shutter open angle.
are factory settings.

   Find Your Products By Category