Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 161 –
Chapter 7 Menu Operations — Menu list
Item Description of settings Remark
[LVL CONTROL
CH4(CH2)]
Can be manually adjusted with this item when automatic level adjustment of audio
CH4 (CH2) is [OFF].
[0]…[70]…[100]
f The channel is replaced when [CH3/4] is selected
in [VR SELECT]. Setting values are inherited
between replaced channels.
[MIC LOWCUT CH1] Selects the microphone lowcut lter for input channel 1.
[FRONT] Works when the front microphone is selected.
[W.L.] Enabled only when wireless microphone receiver is selected.
[REAR] Enabled only when the rear microphone is selected.
[OFF] The microphone lowcut lter does not work for any input.
[MIC LOWCUT CH2] Selects the microphone lowcut lter for input channel 2.
[FRONT] Works when the front microphone is selected.
[W.L.] Enabled only when wireless microphone receiver is selected.
[REAR] Enabled only when the rear microphone is selected.
[OFF] The microphone lowcut lter does not work for any input.
[MIC LOWCUT CH3] Selects the microphone lowcut lter for input channel 3.
[FRONT] Works when the front microphone is selected.
[W.L.] Enabled only when wireless microphone receiver is selected.
[REAR] Enabled only when the rear microphone is selected.
[OFF] The microphone lowcut lter does not work for any input.
[MIC LOWCUT CH4] Selects the microphone lowcut lter for input channel 4.
[FRONT] Works when the front microphone is selected.
[W.L.] Enabled only when wireless microphone receiver is selected.
[REAR] Enabled only when the rear microphone is selected.
[OFF] The microphone lowcut lter does not work for any input.
[LIMITER CH1]
Selects the channel 1 limiter.
Disabled when automatic adjustment of recording levels is selected.
[ON], [OFF]
[LIMITER CH2]
Selects the channel 2 limiter.
Disabled when automatic adjustment of recording levels is selected.
[ON], [OFF]
[LIMITER CH3]
Selects the channel 3 limiter.
Disabled when automatic adjustment of recording levels is selected.
[ON], [OFF]
[LIMITER CH4]
Selects the channel 4 limiter.
Disabled when automatic adjustment of recording levels is selected.
[ON], [OFF]
[TEST TONE] Selects test signals.
[NORMAL] Outputs test tones to all channels if the <OUTPUT> switch
is <BARS>, and <CH1> on the <AUDIO IN> switch is set to
<FRONT>.
[ALWAYS] Outputs test tones to all channels at all times when the
<OUTPUT> switch is <BARS>.
[CHSEL] Outputs test tones to the channels where <CH1> or <CH2>
on the <AUDIO IN> switch is set to <FRONT> when the
<OUTPUT> switch is set to <BARS>. The test tones are output
to CH3, CH4.
[OFF] Does not output the test tone.
[FRONT MIC POWER]
Sets the phantom power of the front microphone.
[ON], [OFF]
[REAR MIC POWER]
Sets the phantom power of the rear microphone.
Phantom power is not output when [OFF] is selected, even if the <REAR AUDIO
CH1> and <REAR AUDIO CH2> switches are set to <+48V>.
[ON], [OFF]
[MONITOR SELECT]
Selects the signal method to output to the monitor when the <MONITOR
SELECT> switch is set to <ST> (stereo).
[STEREO], [MIX]
[FRONT MIC LEVEL]
Selects the front microphone input level.
[−40dB], [−50dB]
[REAR MIC CH1/3
LVL]
Selects the rear microphone input level.
[−50dB], [−60dB]
[REAR MIC CH2/4
LVL]
Selects the rear microphone input level.
[−50dB], [−60dB]
[REAR LINE IN LVL]
Selects the rear line input level.
[−3dB], [0dB], [4dB]
[AUDIO OUT LVL]
Selects the audio output level.
[−3dB], [0dB], [4dB]
[HEADROOM]
Sets the headroom (standard level).
[18dB], [20dB]
are factory settings.

   Find Your Products By Category