Panasonic Camcorder Memory Card Camera-Recorder User Manual

0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 209
 
– 19 –
Chapter 2 Description of Parts — Audio (output) function section
Audio (output) function section
7
6
3
6
21
5
4
1 <MONITOR> (volume adjustment) dial
Adjust the volume of the speaker and earphones.
2 <ALRAM> (alarm volume adjustment) dial
Adjust the volume of the alarm from the speaker and earphones.
When set to the minimum position, the alarm cannot be heard.
3 Speaker
During recording, EE audio can be monitored, and during playback, playback audio can be monitored.
The alarm is output in sync with ashing/lighting of the <WARNING> lamp or warning indicator.
Audio from the speaker automatically disappears when earphones are connected to the <PHONES> terminal.
4 Audio channel selector switch
Switch the audio channels output to the speaker, earphones, and <AUDIO OUT> terminal.
<CH1/2> Outputs the signals of audio channels 1 and 2.
<CH3/4> Outputs the signals of audio channels 3 and 4.
The channel display of the audio level meter on the display window and viewnder are also switched interlocked to operation of this switch.
5 <MONITOR SELECT> (audio selection) selector switch
Select audio output from the speaker, earphones and <AUDIO OUT> terminal interlocked with the audio channel selector switch.
<CH1/3> Outputs the signal of either audio channel 1 or audio channel 3.
<ST>
Outputs either the stereo audio signals of audio channels 1 and 2 or the stereo audio signals of audio channels 3 and 4. Stereo audio
signals can be changed to the MIX signals in the main menu → [I/F SETUP] → [MIC/AUDIO] → [MONITOR SELECT].
<CH2/4> Outputs the signal of either audio channel 2 or audio channel 4.
<MONITOR SELECT> (audio selection)
selector switch
Audio channel selector switch
<CH1/2> <CH3/4>
<CH1/3> Audio channel 1 Audio channel 3
<ST> Stereo output from audio channels 1 and 2* Stereo output from audio channels 3 and 4*
<CH2/4> Audio channel 2 Audio channel 4
* [STEREO] or [MIX] can be switched to in the main menu → [I/F SETUP] → [MIC/AUDIO] → [MONITOR SELECT].
6 <PHONES> (earphones) terminal (mini jack)
This is the terminal for connecting the audio monitor earphones. (stereo)
Audio that is output is the same on both terminals (front side, rear side)
7 <AUDIO OUT> terminal
fOutput audio signals recorded on audio channel 1/2 or 3/4.
fSelect output signals by the <MONITOR SELECT> selector switch.

   Find Your Products By Category