0
Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
– 33 –
Chapter 3 Recording and Playback — P2 card
P2 card access LED P2 card status Mode check display*
Off
Card not supported
This card cannot be used on the camera. Replace the
card.
[NOT SUPPORTED]
Illegal format The P2 card is not properly formatted. Reformat the card. [FORMAT ERROR]
No card
The P2 card is not inserted. The card is waiting to be
recognized.
[NO CARD]
Unauthenticated card
This microP2 memory card cannot be authenticated.
Select the main menu → [CLIP] → [AUTHENTICATE],
and enter the password.
For details, refer to “Manual CPS authentication”
(page 122).
[AUTH NG]
USB non-access
The P2 card cannot be accessed since the mode is the
USB device mode.
No display
* The mode check is displayed on the viewnder screen. For details, refer to “Viewnder status display” (page 70).
P2 card recording time
r P2 cards supported on the camera
Optional P2 and microP2 memory cards with a capacity of 4 GB to 64 GB can be used with the camera. (As of September, 2013)
@@
NOTE
t AJ-P2C002SG (2 GB) cards cannot be used.
t When AVC-Intra 100 in 1080/59.94P or 1080/50P mode is selected, you cannot record to the following P2 cards.
- P2 memory cards of R, A, or E series
t The driver installed on the camera may be required to be updated depending on the type of P2 card. (page 199)
t Refer to our support desk at the following website for the latest information not included in these operating instructions.
http://pro-av.panasonic.net/
r P2 card recording times
(Example when a 64 GB card is used)
System mode Recording format (codec) Recording time
1080P AVC-I100 Approx. 32 min
1080i
AVC-I100 Approx. 64 min
AVC-G25 Approx. 256 min
480i, 576i
DVCPRO50 Approx. 128 min
DV Approx. 256 min
@@
NOTE
t The above table shows values for regular recording. With native recording, even longer recording times are available depending on the system mode.
t In the case of 32 GB P2 cards, the recording time becomes 1/2 of the above recording times, in the case of 16 GB P2 cards, the recording time
becomes 1/4, and in the case of 8 GB P2 cards, the recording time becomes 1/8.
t Indicated capacities include management and other area, so the space available for recording is less than the values in the table above.
Dividing clips recorded on P2 cards
If P2 cards with a capacity of 8 GB or more are used on the camera, recording is automatically continued as another clip when a single continuous
recording time exceeds the following times. When thumbnails for clips are handled (displayed, deleted, restored, etc.) on P2 devices, they can be
handled as a single clip. Clips may be displayed as separate clips in nonlinear editing software and on a computer. When recording on microP2 memory
cards that exceed 32 GB using AVC-LongG codec, recording can be continued as the same clip by setting in main menu → [REC/PB] → [REC/PB
SETUP] → [FILE SPLIT].
Recording format (excluding native recording) Continuous recording time
AVC-I100 (1080P) Approx. 3 min
AVC-I100 (1080i)
DVCPRO HD
Approx. 5 min
AVC-G50
AVC-I50
DVCPRO50
Approx. 10 min
AVC-G25
DVCPRO
DV
Approx. 20 min
CPS (Content Protection System)
The microP2 memory card supports the security function “Content Protection System” that allows encryption formatting to prevent data leak to third
parties.
To use the CPS function, set a CPS password to the camera, and enable the microP2 memory card authentication and encryption formatting functions.
An encrypted microP2 memory card will be automatically recognized between devices where the same CPS password is set, and recording and
playback of the microP2 memory card are enabled. For details, refer to “Setting CPS password” (page 122).
@@
NOTE
t Set or delete the CPS password in the main menu → [CLIP] → [PROPERTY] → [CPS PASSWORD].
Find Your Products By Category
Please Login
