0

Out of 0 Ratings

Owner's of the Panasonic Camcorder Memory Card Camera-Recorder gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 209
 
– 65 –
Chapter 4 Adjustments and Settings for Recording — Setting the time data
Externally locking the time code
The internal time code generator of the camera can be locked to an external generator. In addition, the time code generator of an external device can be
locked to the internal time code generator of the camera.
Example of connections for external locking
As shown in the gure, connect both the reference video signal and the reference time code.
For details on reference signal and generator lock, refer to “Selection of external reference signal and generator lock setting” (page 61).
While the scan reverse is activated, delay of the image occurs internally. When the camera is connected in parallel to a device capable of recording
without a delay, the delay of time codes must be synchronized in the main menu [REC/PB] [TC/UB] [TC OUTPUT REF].
r When locking onto an external signal
Reference time code
<GENLOCK IN> or <SDI IN> terminal
<TC IN> terminal
Reference video signal
r When multiple cameras are connected and one is used as a reference camera
When building a system using multiple cameras, set the inputs and outputs to the same on all cameras. If different settings are set, shooting timing will
no longer match.
<TC OUT> terminal
<TC IN> terminal
Reference camera
Reference video signal
<GENLOCK IN> or <SDI
IN> terminal
<TC OUT> terminal
<TC IN> terminal
Reference video signal
<GENLOCK IN> or <SDI
IN> terminal
To next camera
r When the camera and external device are locked to the external time code generator, and the TC OUT output signal of the camera
is used for simultaneous recording
TCG
DAT
Reference video signal
Recording device
External time code generator
TC OUT terminal
<TC OUT> terminal
<SDI OUT1> terminal
<HDMI OUT> terminal
<SDI OUT2> terminal
<VIDEO OUT> terminal
HDMI IN terminal
SDI IN terminal
VIDEO IN terminal
TC IN terminal
TC IN terminal
REF IN terminal
<TC IN> terminal
Device capable of recording
without delay
<GENLOCK IN> or <SDI IN> terminal
[TC OUTPUT REF] setting:
[VIDEO OUT]