0

Out of 0 Ratings

Owner's of the Canon Camcorder XF200 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 246
 
57
Changing Main Camera Functions with the Joystick
English
Changing Main Camera Functions with the Joystick
You can adjust three main camera functions –shutter speed, white balance and gain– using only the joystick
(direct setting mode). This section will explain the basic operation of the direct setting mode. For specific details
about the functions please refer to the each function’s section: shutter speed (A 58), white balance (A 69),
gain (A 62).
Using the Direct Setting Mode
1 Press SET.
The onscreen display of the function to be
adjusted will be highlighted in orange.
Push the joystick left/right to change the function
to be adjusted. Pushing the joystick to the right
will cycle through the options in the following
order: White balance White balance preset
fine tuning/color temperature setting
1
Gain
mode Gain value
2
Shutter speed mode
3
Shutter value
2, 3
White balance
1
Only when the white balance mode is set to preset white
balance or color temperature.
2
Only during manual adjustment mode.
3
Only when the SHUTTER switch is set to ON.
2 Push the joystick up/down to change the selected mode or select the desired value and then press
SET.
The selected mode/value will be set and the camcorder will exit the direct setting mode.
Depending on the function selected, additional adjustment may be possible or necessary before pressing
SET.
NOTES
The direct setting mode will end automatically if no operation is performed for about 6 seconds or if you open
the menu or a status screen.
Operating modes:
C OPY