0

Out of 0 Ratings

Owner's of the Canon Camcorder XF200 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 246
 
119
Special Recording Modes
English
The front and rear tally lamps go out and [INT STBY] appears at the top of the screen (with [INT] flashing).
NOTES
You can use only one special recording mode at a time.
The interval and the number of frames recorded cannot be changed while recording.
Some frames at the point the recording was stopped may be recorded and added to the end of the clip.
Interval recording mode will be deactivated if the special recording mode is changed or turned off. It will be
deactivated also if you change the movie format or video configuration.
During this special recording mode, the time code’s running mode (A 90) can be set to [Rec Run] or [Regen.]
and the time code advances by the number of frames recorded. If the time code’s running mode is set to [Free
Run] or the time code is input from an external source, the running mode will switch to [Rec Run] during
special recording mode. When the special recording mode is deactivated, the running mode will return to its
previous setting.
During special recording mode, the time code signal will not be output from the TIME CODE terminal,
3G/HD-SDI terminal or MON. terminal.
Frame Recording Mode
Set the number of frames in advance. We recommend operating the camcorder remotely or stabilizing the
camcorder, for example, on a tripod. Sound is not recorded in this special recording mode.
Configuring Frame Recording Mode
1 Open the [Recorded Frames] submenu.
[w Other Functions] > [Frame Recording] > [Recorded Frames]
2 Select the desired number of frames and then press SET.
Available options depend on the frame rate used: 1, 3, 6 or 9 (23.98P,
29.97P, 59.94i), or 2, 6 or 12 (59.94P).
Activating Frame Recording Mode and Recording
1 Open the [Special Recording] submenu.
[w Other Functions] > [Special Recording]
2 Select [Frame Recording] and then press SET.
[FRM STBY] appears at the top of the screen (with [FRM] flashing).
3 Press the START/STOP button to begin recording.
The camcorder automatically records the set number of frames.
The front and rear tally lamps illuminate.
[FRM STBY] changes to [Ü FRM REC] while recording frames and [Ü FRM STBY] when frames are not
being recorded.
Repeat until you finish recording.
4 Open the [Special Recording] submenu.
[w Other Functions] > [Special Recording]
5 Select [Off] and then press SET.
Frame recording mode ends and all of the recorded frames are joined together into one clip.
The tally lamps go out and [STBY] appears at the top of the screen.
Operating modes:
[w Other Functions]
[
Frame Recording]
[Recorded Frames]
[1]
[w Other Functions]
[Special Recording]
[Off]
C OPY