0

Out of 0 Ratings

Owner's of the Canon Camcorder XF200 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 246
 
Recording Audio
106
CH3/CH4: Audio Level Adjustment
The audio level for CH3 and CH4 can only be adjusted when [¡ Audio
Setup] > [Audio Input] > [4-Channel Input] is set to [On] (4-channel
audio recording). The audio recording level settings are common to both
CH3 and CH4.
1 Open the [CH3/CH4 Mode] submenu.
[¡ Audio Setup] > [Audio Input] > [CH3/CH4 Mode]
2 Select [Automatic] or [Manual] and then press SET.
If you selected [Automatic], you do not need to perform the rest of the
procedure. If you selected [Manual], continue the procedure to set the
audio recording level.
3 Open the [CH3/CH4 Level] submenu.
[¡ Audio Setup] > [Audio Input] > [CH3/CH4 Level]
4 Push the joystick up/down to set the audio recording level and
then press SET.
As a guideline, adjust the audio recording level so that the audio level
meter on the screen will go to the right of the -18 dB mark (one mark
right of the -20 dB mark) only occasionally.
NOTES
When recording audio input from the INPUT 1/INPUT 2 terminals, if either CH1 or CH2 is set to manual audio
level adjustment, you can also activate the audio peak limiter to prevent audio distortions. When activated, the
audio peak limiter will limit the amplitude of audio input signals when they exceed -6 dBFS. Use the [¡ Audio
Setup] > [Audio Input] > [INPUT 1&2 Limiter] setting.
We recommend using headphones when adjusting the audio level. If the input level is too high, audio may
become distorted even if the audio level indicator shows an appropriate level.
If you set an assignable button to [Audio Level] (A 129), you can press the button to turn the onscreen audio
level indicator on and off.
Monitoring the Audio with Headphones
You can connect to the × (headphone) terminal any pair of
headphones with a 3.5 mm stereo mini plug to monitor
the recorded audio. Press the HEADPHONE +/- buttons to
adjust the volume.
NOTES
You can also adjust the headphone volume with the
[¡ Audio Setup] > [Audio Output] > [Headphone
Volume] setting.
When you are monitoring the audio, you can choose to
synchronize the audio signal with the video signal or
monitor the audio in real time. Use the [¡ Audio Setup]
> [Audio Output] > [Monitor Delay] setting to select the
method.
[¡ Audio Setup]
[Audio Input]
[CH3/CH4 Mode]
[Automatic]
[¡ Audio Setup]
[Audio Input]
[CH3/CH4 Level]
[50]
× (headphone)
terminal
C OPY