Canon Camcorder XF200 User Manual

0

Out of 0 Ratings

Owner's of the Canon Camcorder XF200 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 246
 
71
White Balance
English
Preset White Balance/Color Temperature
The camcorder features two preset white balance settings for recording outdoors (daylight) and indoors
(incandescent light). These preset settings can be fine-tuned between -9 and +9. Alternatively, you can specify
the desired color temperature between 2,000 K and 15,000 K in 100 K increments.
Using the Joystick
1 Open the PRESET's [Mode] submenu to select the
white balance adjustment mode.
[~ Camera Setup] > [White Balance] > [PRESET] >
[Mode]
2 Select [Preset] and then press SET.
3 Back in the [PRESET] submenu, select [Preset] and
then press SET to select the white balance mode
assigned to the PRESET position.
4 Select [Daylight], [Tungsten] or [Kelvin], press SET and
then press MENU to close the menu.
5 Set the WHITE BAL. switch to PRESET.
• The icon of the selected white balance mode will appear
on the screen.
6 Press SET and push the joystick left/right until the
white balance icon is highlighted in orange.
7 While the selected icon is highlighted in orange, push
the joystick to the right.
• If you selected [Daylight] or [Tungsten], the adjustment
value [±0] will appear next to the icon, highlighted in
orange.
• If you selected [Kelvin], the color temperature value
[5500 K] will appear next to the È icon, highlighted in
orange.
8 Push the joystick up/down to fine tune the preset
setting or set the desired color temperature and then
press SET.
• The selected adjustment value/color temperature will be
set and the camcorder will exit the direct setting mode.
Remote Operation Using Browser Remote
After completing the necessary preparations (A 182), you
can adjust the white balance remotely from a connected
device using the Browser Remote application.
1 Press the white balance mode button on the Browser
Remote screen.
2 Select [¼], [É] or [È].
3 Press the adjustment value [
Ê ±0] (¼, É) or color temperature [5500K] (È) and then select the
desired value from the list.
• You may need to scroll up/down to see all the available values.
• The selected value will be displayed on the Browser Remote screen and will be applied on the camcorder.
[~ Camera Setup]
[White Balance]
[PRESET]
[Mode]
[Preset]
[~ Camera Setup]
[White Balance]
[PRESET]
[Preset]
[Daylight]
C OPY

   Find Your Products By Category