0
Owner's of the Canon Camcorder XF200 gave it a score of 0 out of 5. Here's how the scores stacked up:
Special Recording Modes
120
NOTES
• You can use only one special recording mode at a time.
• The number of frames recorded cannot be changed while recording.
• Some frames at the point the recording was stopped may be recorded and added to the end of the clip.
• Frame recording mode will be deactivated if the special recording mode is changed or turned off. It will be
deactivated also if you change the movie format or video configuration.
• During this special recording mode, the time code’s running mode (A 90) can be set to [Rec Run] or [Regen.]
and the time code advances by the number of frames recorded. If the time code’s running mode is set to [Free
Run] or the time code is input from an external source, the running mode will switch to [Rec Run] during
special recording mode. When the special recording mode is deactivated, the running mode will return to its
previous setting.
• During special recording mode, the time code signal will not be output from the TIME CODE terminal,
3G/HD-SDI terminal or MON. terminal.
Slow & Fast Motion Mode
When you set the frame rate to a progressive frame rate (A 55), the camcorder can record with a frame rate
(shooting frame rate) that is different from the playback frame rate. Recording a clip at a higher frame rate than
the [Frame Rate] setting will result in a slow motion effect during playback (up to 40% of the original speed).
Conversely, a lower frame rate will result in a fast motion effect (up to 5x the original speed). Sound is not
recorded in this special recording mode.
Configuring Slow & Fast Motion Mode
1 Open the [S&F Frame Rate] submenu.
[w Other Functions] > [Slow & Fast Motion] > [S&F Frame Rate]
2 Select the desired shooting frame rate and then press SET.
• Available shooting frame rates depend on the resolution used.
Available shooting frame rates (fps)
* Available only when the resolution is set to 1280x720.
Activating Slow & Fast Motion Mode and Recording
1 Open the [Special Recording] submenu.
[w Other Functions] > [Special Recording]
2 Select [Slow & Fast Motion] and then press SET.
• [S&F STBY] appears at the top of the screen.
• The selected shooting frame rate appears on the right of the screen
next to the frame rate setting (the playback frame rate).
Operating modes:
12 15 18 20 21 22 24 25 26 27
28 30 32* 34* 36* 40* 44* 48* 54* 60*
[w Other Functions]
[
Slow & Fast Motion]
[S&F Frame Rate]
[30]
[w Other Functions]
[Special Recording]
[Off]
C OPY
Find Your Products By Category
Please Login
