0

Out of 0 Ratings

Owner's of the Canon Camcorder XF300 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 201
 
139
External Connections
6
Video Output Configuration
External Connections
External Connections
Video Output Configuration
The video signal output from the HD/SD SDI (b only), HDMI OUT
and HD/SD COMPONENT OUT terminals depends on the clip’s video
configuration, the capability of the external monitor (for video output from
the HDMI OUT terminal) and on various menu settings. Video output from
the AV or VIDEO 2 terminal will always be in 576/50i standard.
Video Output Configuration by Terminal
Refer to the following table for the video output configuration from each
terminal. If necessary, you can superimpose the onscreen displays on the
video displayed on the external monitor (0 143).
Operating modes:
V
ideo Output Configuration by Terminal
1
Set [N Video Setup] [SDI Output] to [HD], [SD] or [Off].
2
When you set [M LCD/VF Setup] [HD Output] (under [Zebra]) to [On], you can display zebra patterns on an external monitor. In
such case, output from the HD/SD SDI terminal (b only) and HD/SD COMPONENT OUT terminal will be in HD, regardless of
their setting.
3
Video output will automatically switch to HD or SD, depending on the capability of the external monitor.
4
Set [N Video Setup] [Component Output] to [HD] or [SD].
5
When output from the HDMI OUT terminal is SD (576/50P), the output of the HD/SD SDI terminal will also be 576/50P.
Terminal J
HD/SD SDI
1, 2
(b only)
HDMI OUT
2, 3
HD/SD COMPONENT
OUT
2, 4
AV or
VIDEO 2
Recording frame
size / Frame rate L
HD
output
SD
output
HD
output
SD
output
HD
output
SD
output
SD
output
1080/50i
1080/50i 576/50i
5
1080/50i 576/50P 1080/50i 576/50i 576/50i
1080/25P
1080/slow or
fast motion
720/50P
720/50P 576/50i
5
720/50P 576/50P 720/50P 576/50i 576/50i
720/25P
720/slow or
fast motion