0

Out of 0 Ratings

Owner's of the Canon Camcorder XF300 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 201
 
Customization
112
4
Custom Picture Settings
Copying a File from an SD Card to the Camcorder
1 After selecting a file on the SD card, open the [Copy To Cam.]
submenu.
[H X Transfer File] [Copy To Cam.]
2 Select the file slot under which to save the file and then press SET.
3 Select [OK] and then press SET.
The currently selected file will be copied to the selected slot on the
camcorder, overwriting the file in that slot.
4 Press the CUSTOM PICT. button to exit the custom picture menu.
Replacing a File on an SD Card with a File in the Camcorder
1 After selecting a file on the SD card to replace, open the [Load From
Cam.] submenu.
[H X Transfer File] [Load From Cam.]
2 Select the file to transfer to the SD card and then press SET.
3 Select [OK] and then press SET.
The file on the SD card will be overwritten by the one on the
camcorder.
4 Press the CUSTOM PICT. button to exit the custom picture menu.
NOTES
You can also copy a custom picture file embedded in a clip to the
camcorder (0 135).
Embedding Custom Picture Settings in a Recording
You can record video or take a photo with your custom picture settings
applied to it. Later, those embedded settings in the video or photo can be
copied to the camcorder (0 160) and be applied to future recordings.
You may find that embedding custom picture settings in a recording helps
you keep track of them, such as verifying what settings were used for a
particular recording.
1 Open the [Add X File] submenu.
[J Other Functions] [Add X File]
2 Select [To Clip] or [To Photo] and then press SET.
Selecting [To Clip] will embed the custom picture file in a clip while
selecting [To Photo] will embed the file in a photo.
3 Select [On] and then press SET.
[H X Transfer File]
[Copy To Cam.]
[H X Transfer File]
[Load From Cam.]
[J Other Functions]
[Add X File]