0

Out of 0 Ratings

Owner's of the Canon Camcorder XF300 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 201
 
103
Recording
3
Special Recording Modes
Frame Recording Mode
Set the number of frames in advance. We recommend using the wireless
controller or stabilizing the camcorder, for example, on a tripod. Sound is
not recorded in this mode.
Configuring Frame Recording Mode
1 Open the [Rec Frames] submenu.
[J Other Functions] [Frame Rec] [Rec Frames]
2 Select the desired number of frames and then press SET.
Available options are 2, 6 and 12.
Activating Frame Recording Mode and Recording
1 Open the [Special Rec] submenu.
[J Other Functions] [Special Rec]
2 Select [Frame Rec] and then press SET.
[FRM STBY] appears at the top of the screen (with [FRM] flashing).
3 Press the START/STOP button to begin recording.
The camcorder automatically records the set number of frames.
The tally lamps illuminate.
[FRM STBY] changes to [N FRM REC] while recording frames and
[N FRM STBY] when frames are not being recorded.
Repeat until you finish recording.
4 Open the [Special Rec] submenu.
[J Other Functions] [Special Rec]
5 Select [Off] and then press SET.
Frame recording mode ends and all of the recorded frames are joined
together into one clip.
The tally lamps go out and [STBY] appears at the top of the screen.
NOTES
You can use only one special recording mode at a time.
While recording, you cannot change the number of frames.
Some frames at the point the recording was stopped may be recorded
and added to the end of the clip.
Frame recording mode will be deactivated if the special recording mode
is changed or turned off. It will be deactivated also if you change the
[J Other Functions] [Bit Rate/Resolution] or [Frame Rate] setting.
[J Other Functions]
[
Frame Rec]
[Rec Frames]
[2]
[J Other Functions]
[
Special Rec]
[Off]