0

Out of 0 Ratings

Owner's of the Canon Camcorder XF300 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 201
 
105
Recording
3
Special Recording Modes
3 Press the START/STOP button to begin recording.
The camcorder automatically records at the set frame rate.
The tally lamps illuminate.
[S&F STBY] changes to [N S&F REC] while recording.
4 Press the START/STOP button again to stop recording.
The camcorder records the clip.
The tally lamps go out and [S&F STBY] appears at the top of the
screen.
NOTES
You can use only one special recording mode at a time.
While recording, you cannot change the shooting frame rate.
For lower shooting frame rates, it may take approximately 1 second to
stop recording.
Slow & fast motion mode will be deactivated if the special recording
mode is changed or turned off. It will be deactivated also if you change
the video configuration.
The time code advances while video is recorded. If the running mode of
the time code (0 81) is set to [Free Run] or the time code is input from
an external source (b only), the running mode will switch to [Rec
Run] during special recording mode. When special recording mode is
deactivated, the running mode will return to its previous setting.
b During special recording mode, the time code signal will not
be output from the TIME CODE terminal or HD/SD SDI terminal.
When the bit rate is set to 50 Mbps (0 51) during slow motion
recording, relay recording is not available.