HP (Hewlett-Packard) Printer HP Officejet Pro 8100 N811A Inkjet Printer User Manual

3.8

Out of 2 Ratings

Owner's of the HP (Hewlett-Packard) Printer HP Officejet Pro 8100 N811A Inkjet Printer gave it a score of 3.8 out of 5. Here's how the scores stacked up:

  • Reliability

    4.0 out of 5

  • Durability

    4.0 out of 5

  • Maintenance

    3.5 out of 5

  • Performance

    4.0 out of 5

  • Ease of Use

    3.5 out of 5
of 148
 
Document failed to print
The printer could not print the document because a problem occurred in the printing system.
For information about solving printing problems, see Solve printer problems.
Printer failure
There was a problem with the printer. Usually, you can resolve such problems by completing the
following steps:
1.
Press the
(Power) button to turn off the printer.
2. Unplug the power cord, and then plug in the power cord again.
3.
Press the
(Power) button to turn on the printer.
If this problem persists, write down the error code provided in the message, and then contact HP
support. For more information about contacting HP support, see
HP support.
Door or cover open
Before the printer can print documents, all doors and covers must be closed.
TIP: When completely closed, most doors and covers snap into place.
If the problem persists after you’ve securely closed all doors and covers, contact HP support. For
more information, see
HP support.
Previously used ink cartridge installed
The ink cartridge identified in the message was previously used in a different printer.
You can use ink cartridges in different printers, but if the cartridge was left outside of a printer for an
extended period of time, the print quality of your documents might be affected. Also, if you use ink
cartridges that have been used in a different printer, the ink level indicator might be inaccurate or
unavailable.
If the print quality is unsatisfactory, try cleaning the printheads. For more information, see
Clean the
printhead.
NOTE: Ink from the cartridges is used in the printing process in a number of different ways,
including in the initialization process, which prepares the printer and cartridges for printing, and
in printhead servicing, which keeps print nozzles clear and ink flowing smoothly. In addition,
some residual ink is left in the cartridge after it is used. For more information, see
www.hp.com/
go/inkusage.
For more information about storing ink cartridges, see Supplies.
Ink cartridges depleted
The cartridges listed in the message must be replaced to resume printing. HP recommends that you
do not remove an ink cartridge until a replacement is ready to install. For more information, see
Replace the ink cartridges.
Ink cartridge failure
The cartridges listed in the message are damaged or have failed. For more information, see Replace
the ink cartridges.
Appendix F
134 Errors (Windows)

   Find Your Products By Category