0

Out of 0 Ratings

Owner's of the Canon Camcorder XF205 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 246
 
177
Connecting to a Wi-Fi Network
English
Manual Setup
If you prefer, you can enter manually the details of the Wi-Fi network you want to connect to. Follow the
instructions on the screen to complete the procedure.
1 Open the [Set Up New] submenu.
[w Other Functions] > [Network Settings] > [Connection Settings]
> [Set Up New]
2 Select the [Manual] method.
[Wi-Fi] > [Infrastructure] > [Manual]
3 To enter the [SSID] (network name), select [Input] and then press
SET.
Enter the SSID (network name) of the selected Wi-Fi network using
the keyboard screen (A 176).
4 Select the Wi-Fi network’s authentication method and then press SET.
If you selected [Shared Key], skip to step 6.
5 Select the Wi-Fi network’s encryption method and then press SET.
If the authentication method is [Open], you can select [WEP] and continue to step 6, or [No encryption] and
skip to step 7.
If the authentication method is [WPA-PSK] or [WPA2-PSK], you can select [TKIP] or [AES].
6 Enter the encryption key as described in Encrypted Access Points (A 176).
7 Continue with the procedure to configure the IP address assignment (A 178).
Camera Access Point
In this mode the camcorder itself serves as a wireless access point to which other Wi-Fi-enabled devices can
connect. Follow the instructions on the screen to complete the procedure.
1 Open the [Set Up New] submenu.
[w Other Functions] > [Network Settings] > [Connection Settings]
> [Set Up New]
2 Select the [Camera Access Point] method.
[Wi-Fi] > [Camera Access Point]
3 To enter the [SSID] (network name), select [Input] and then press
SET.
Enter the SSID (network name) the camcorder will use as a Wi-Fi
access point using the keyboard screen (A 176).
The network name is needed to connect the network device to the
camcorder. If necessary, write it down.
4 Select the wireless connection mode (5 GHz band or 2.4 GHz band) and then press SET.
5 Select the channel and then press SET.
Available channels will be different depending on the wireless connection mode selected in the previous
step.
6 Select the encryption method and then press SET.
If you selected [Open/No encryption], skip to step 8. If you selected [WPA2-PSK/AES], continue with step 7.
7 Enter the encryption key as described in Encrypted Access Points (A 176).
This encryption key (password) is needed to connect the network device to the camcorder. If necessary,
write it down.
[w Other Functions]
[Network Settings]
[Connection Settings]
[Set Up New]
[w Other Functions]
[Network Settings]
[Connection Settings]
[Set Up New]
C OPY