0

Out of 0 Ratings

Owner's of the Canon Camcorder XF205 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 246
 
121
Special Recording Modes
English
3 Press the START/STOP button to begin recording.
The front and rear tally lamps illuminate.
[S&F STBY] changes to [ÜS&F REC] while recording.
4 Press the START/STOP button again to stop recording.
The clip is recorded at the selected frame rate.
The tally lamps go out and [S&F STBY] appears at the top of the screen.
NOTES
Slow & fast motion recording cannot be used together with other special recording modes or double slot
recording.
The shooting frame rate cannot be changed while recording.
For lower shooting frame rates, it may take approximately 1 second to stop recording.
Slow & fast motion mode will be deactivated if the special recording mode is changed or turned off. It will be
deactivated also if you change the movie format or video configuration.
When the bit rate is set to 50 Mbps (A 55), relay recording is not available during slow motion recording.
During this special recording mode, the time code’s running mode (A 90) can be set to [Rec Run] or [Regen.]
and the time code advances by the number of frames recorded. If the time code’s running mode is set to [Free
Run] or the time code is input from an external source, the running mode will switch to [Rec Run] during
special recording mode. When the special recording mode is deactivated, the running mode will return to its
previous setting.
During special recording mode, the time code signal will not be output from the TIME CODE terminal,
3G/HD-SDI terminal or MON. terminal.
Pre-recording Mode
When pre-recording mode is activated, the camcorder starts recording
continuously into a temporary memory of approximately 3 seconds so
when you press the START/STOP button, the clip will contain also
approximately 3 seconds of video and audio recorded before you pressed
the button.
1 Open the [Special Recording] submenu.
[w Other Functions] > [Special Recording]
2 Select [Pre-Recording] and then press SET.
[PRE REC STBY] appears at the top of the screen.
3 Press the START/STOP button to begin recording.
The front and rear tally lamps illuminate.
[PRE REC STBY] changes to [Ü PRE REC] while recording.
Operating modes:
Shooting frame rate
Playback frame rate
[w Other Functions]
[Special Recording]
[Off]
C OPY