0

Out of 0 Ratings

Owner's of the Canon Camcorder XF205 gave it a score of 0 out of 5. Here's how the scores stacked up:
  • Reliability

    0 out of 5
  • Durability

    0 out of 5
  • Maintenance

    0 out of 5
  • Performance

    0 out of 5
  • Ease of Use

    0 out of 5
of 246
 
Setting the Time Code
92
NOTES
The frames value of the time code runs from 0 to 23 (frame rate set to 23.98P) or from 0 to 29 (all other frame
rates).
• However, when [¤ TC/UB Setup] > [Time Code] > [XF Legacy Sync] is set to [On], even when
the frame rate is set to 23.98P, the frames value of the time code output from the TIME CODE terminal will run
from 0 to 29.
When you are using interval recording, frame recording or slow & fast motion recording mode, you cannot
select the [Free Run] running mode. Conversely, when you are using pre-recording mode and when the movie
format is set to MXF+MP4, [Free Run] is set automatically and cannot be changed.
When you mix drop frame and non-drop frame time codes, there might be a discontinuity in the time code at
the point where the recording starts.
When you are using the [Free Run] running mode, the time code will continue running as long as the built-in
rechargeable lithium battery is charged, even if you disconnect all other power sources. However, this is less
accurate than when the camcorder is on.
If you set an assignable button to [Time Code] (A 129), you can press the button to open the
[¤ TC/UB Setup] > [Time Code] submenu.
C OPY