Canon Camcorder XF205 User Manual

0

Out of 0 Ratings

Owner's of the Canon Camcorder XF205 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 246
 
87
Image Stabilizer
English
Image Stabilizer
Use the image stabilizer to compensate for camcorder shake in order to achieve steadier shots. There are 3
methods of image stabilization; select the method that best suits your needs.
Dynamic IS Ä: Dynamic IS compensates for a higher degree of camcorder shake, such as when shooting
while walking, and is more effective as the zoom approaches full wide angle.
Standard IS Å: Standard IS compensates for a lower degree of camcorder shake, such as when shooting
while remaining stationary, and is suitable for shooting natural-looking scenes.
Powered IS Ç: Powered IS is most effective when you are stationary and zooming in on far subjects using high
zoom ratios (the more you approach the telephoto end). This mode is not suitable for tilting and panning shots.
To activate Dynamic IS or Standard IS
1 Open the OIS functions [Select] submenu.
[~ Camera Setup] > [OIS Functions] > [Select]
2 Select [Img Stab.] and then press SET.
• Select [Off] instead to turn off the image stabilization, for example,
when recording with the camcorder mounted on a tripod.
3 Open the [Image Stabilizer] submenu.
[~ Camera Setup] > [OIS Functions] > [Image Stabilizer]
4 Select [Dynamic] or [Standard] and then press SET.
• The icon of the selected mode appears on the bottom of the screen.
To activate Powered IS
Press the POWERED IS button to activate Powered IS.
•The Powered IS icon (Ç) appears on the bottom of the screen.
• Press the POWERED IS button again to return the camcorder to the
image stabilization method set in the menu.
• Powered IS can be used even when [~ Camera Setup] > [OIS
Functions] > [Select] is set to [Off].
NOTES
• If you set an assignable button to [Img Stab.] (A 129), you
can press the button to turn the selected image stabilization
method on or off.
• If the degree of camcorder shake is too high, the image
stabilizer may not be able to compensate fully.
• When using Dynamic IS, the edges of the picture may be
adversely affected (ghosting, artifacts and/or dark areas
may appear) when compensating for a high degree of
camcorder shake.
• When [~ Camera Setup] > [Wide-End Angle] is set to
[Wider], [Image Stabilizer] will change automatically to
[Standard] and it cannot be changed.
Operating modes:
[~ Camera Setup]
[OIS Functions]
[Select]
[Img Stab.]
[~ Camera Setup]
[OIS Functions]
[Image Stabilizer]
[Standard]
C OPY

   Find Your Products By Category