0
Owner's of the Panasonic Car Video System LCD Video Monitor gave it a score of 0 out of 5. Here's how the scores stacked up:
24
25
Main Menu (continued)
Submenu Setting Description
CENTER
*
2
OFF
ON
Displays the center marker.
[OFF] No marker display
[ON] Turns the display on
CROSS
OFF
(H. xxxx V. yyyy)
Displays the cross marker.
[OFF] No marker display
[(H. xxxx V. yyyy)] Displays the marker
Horizontal (H: 20 to 1899), vertical (V: 20 to 1059) can
be displayed for any location. When a set value [(H. xxxx
V. yyyy)] has been confirmed, press the rotary knob
<PICTURE> again to set horizontal and vertical
positions.
(The factory default is set to H: 480 V: 270.)
COLOR
WHITE
BLACK
RED
GREEN
BLUE
Selects a marker color.
[WHITE] white
[BLACK] black
[RED] red
[GREEN] green
[BLUE] blue
GPI MARKER1
*
5
4:3
13:9
14:9
CNSCO 2.39
CNSCO 2.35
2:1
VISTA
95% (16:9)
93% (16:9)
90% (16:9)
88% (16:9)
80% (16:9)
USER (16:9)
VAR. (16:9)
95% (4:3)
93% (4:3)
90% (4:3)
88% (4:3)
80% (4:3)
USER (4:3)
VAR. (4:3)
GPI MARKER 1 : Selects the marker displayed by the GPI terminal
[MARKER1 ON/OFF] (→page 60) operation.
GPI MARKER 2 : Selects the marker displayed by the GPI terminal
[MARKER2 ON/OFF] (→page 60) operation.
[4:3] 4:3 marker
[13:9] 13:9 marker
[14:9] 14:9 marker
[CNSCO 2.39] 2.39:1 marker
[CNSCO 2.35] 2.35:1 marker
[2:1] 2:1 marker
[VISTA] VISTA marker
[95% (16:9)] 95 % area marker for 16:9 aspect ratio
[93% (16:9)] 93 % area marker for 16:9 aspect ratio
[90% (16:9)] 90 % area marker for 16:9 aspect ratio
[88% (16:9)] 88 % area marker for 16:9 aspect ratio
[80% (16:9)] 80 % area marker for 16:9 aspect ratio
[USER (16:9)] User set area marker for 16:9 aspect ratio
*
6
[VAR. (16:9)] VAR. set area marker for 16:9 aspect ratio
*
6
[95% (4:3)] 95 % area marker for 4:3 aspect ratio
[93% (4:3)] 93 % area marker for 4:3 aspect ratio
[90% (4:3)] 90 % area marker for 4:3 aspect ratio
[88% (4:3)] 88 % area marker for 4:3 aspect ratio
[80% (4:3)] 80 % area marker for 4:3 aspect ratio
[USER (4:3)] User set area marker for 4:3 aspect ratio
[VAR. (4:3)] VAR. set area marker for 4:3 aspect ratio
GPI MARKER2
*
5
MARKER TYPE
*
7
TYPE1
TYPE2
Selects conventional monitor or camera recorder marker size.
[TYPE1] Conventional monitor marker size
[TYPE2] Marker size compliant with camera recorder (Panasonic camera)
CROSS HATCH
OFF
LOW
HIGH
Turns the cross hatch grid on and off and sets its density.
[OFF] No cross hatch grid display
[LOW] Displays a dim cross hatch grid
[HIGH] Displays a bright cross hatch grid
SIZE
SMALL
LARGE
Selects the cross hatch grid size.
[SMALL] 60 dots and 60 lines
[LARGE] 120 dots and 120 lines
*
2
These settings are disabled when the GPI (→page 60) function is used to control the marker setting.
*
5
Remote control via RS-232C or RS-485 ends in error (error response: ER001) when [GPI MARKER1] or [GPI MARKER2] is se-
lected with the GPI function.
*
6
Since video is displayed at 100%, the marker will not be visible if set to [100%].
*
7
Display size for SD signals differ.
TYPE1: The effective horizontal area meets the SMPTE ST125 for NTSC and ITU-R BT.601-5 for PAL.
TYPE2: The effective horizontal area meets the EIA-RS170A for NTSC and ITU-R BT.470-4 for PAL.
<Note>
• Markers other than the CROSS HATCH marker are not available during 2-screen display, PIXEL TO PIXEL mode, and 3D assist
mode.
Find Your Products By Category
Please Login
