Roland MP3 Player Roland 8-Channel Recorder and Mixer User Manual

0

Out of 0 Ratings

Owner's of the Roland MP3 Player Roland 8-Channel Recorder and Mixer gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 80
 
6
Overview
Panel Description
Front Panel
1
[POWER] switch
Slide this switch in the direction of the arrow to turn the power on/
o (p. 25).
2
[HOLD] switch
When the power is on, setting the [HOLD] switch in the ON position
will disable operation of the knobs, buttons, touch panel, and
master level. Disabling these controls will help prevent unintended
operation.
You can specify which controls to disable by using <SYSTEM
SETUP>Ú<HOLD> (p. 66).
3
SLATE MIC
This mic allows you to break into the input audio and record
comments such as credits or take numbers (p. 50).
4
[SLATE] switch
This switch turns on the slate mic or outputs a slate tone (p. 50). If
you slide the switch to the “MIC” position and hold it there for two
seconds, the slate mic will turn on. If you slide the switch to the
“TONE” position and hold it there for two seconds, a slate tone will
be output.
5
Touch panel display
This touch panel shows various information for the R-88, and also
allows you to make settings and perform operations (p. 10).
6
[ ] (STOP) button
This button stops playback or recording.
7
[ ] (PLAY/PAUSE) button
Press this button to start playback, or to pause playback or
recording.
8
[ ] (REC) button
This button starts recording. During recording, the indicator will
light. If you pause during recording, the indicator will blink.
9
[ ] (−) button
Press this button to move to the beginning of the project, or to
select the previous project. By holding down this button, you can
rewind through the project. You can do this during playback or
while stopped. When making various settings on the R-88, this
button decreases the value of the selected parameter.
10
[ ] (+) button
Press this button to select the next project. By holding down
this button, you can fast-forward through the project. You can
do this during playback or while stopped. When making various
settings on the R-88, this button increases the value of the selected
parameter.
MEMO
If you press both the [
] (−) button and the [ ] (+) button,
the selected value will return to its default setting.
11
[MENU] (HOME) button
This button lets you make various settings for the R-88, such as
recording/playback settings and specifying the date and time (p. 12).
If the home screen is not displayed, this button takes you back to
the home screen.
12
PHONES jack
You can connect headphones here (p. 32).
13
[LEVEL]/[SENS] knob (1/L–8/R),
PK (PEAK) indicator
These knobs adjust the input levels from the XLR input jacks
25
(1/L–8/R) located on the right side panel (p. 31). The inner knob
adjusts LEVEL, and the outer ring adjusts SENS.
The [LEVEL] knobs can be switched between two functions: input
level setting or mixer fader (Level Knob Mode p. 43).
The PK (PEAK) indicator at the right of each knob will light when the
input volume is excessive.
You can change the level at which the PK indicator will light
(SYSTEM SETUP–PEAK INDICATOR p. 66).
14
[MASTER] knob
This knob adjusts the output volume of the mixer. Press this knob to
access the mixer edit screen (p. 43).
15
[MONITOR] knob
This knob adjusts the volume of the headphones and speakers.
Press this knob to access the monitor setting screen (Headphone
setting/PFL /REALTIME ANALYZER).
1 2 53 4 6 7 8
14 15
9
10
11
12
13

   Find Your Products By Category