0
Owner's of the Roland MP3 Player Roland 8-Channel Recorder and Mixer gave it a score of 0 out of 5. Here's how the scores stacked up:
50
SLATE
You can use the [SLATE] switch (p. 6) on the front panel to activate
the slate mic (p. 6) or produce a slate tone.
SLATE TONE
If you slide the [SLATE] switch to the “TONE” position and hold it
there for two seconds, a slate tone will be produced.
The slate tone can be recorded on all tracks of the recorder.
The slate tone will continue sounding even after you release the
[SLATE] switch. It will turn o when you slide the switch once again.
Specifying the Output Destination for
the Slate Tone
1. Choose [MENU]Ú<SYSTEM SETUP>Ú<SLATE TONE
ROUTING>.
<SLATE TONE> is located on page 5/6. Touch to access 5/6.
2. Select the output destination for the slate tone.
Output
destination
Explanation
MIX Output only to the internal mixer’s output.
MIX+REC
Output to the internal mixer’s output and to all tracks
of the recorder. The slate tone will not be output to
OUTPUT or to USB.
MIX+OUT
Output to the internal mixer’s output, to OUTPUT, and
to USB. The slate tone will not be recorded.
ALL
Output to the internal mixer’s output, to all tracks of the
recorder, to OUTPUT, and to USB.
SLATE MIC
When you slide the [SLATE] switch to the “MIC” position and hold
it there for two seconds, the MIC indicator will light and the slate
mic will turn on. You can use the slate mic to record credits or
comments for the scene on each track of the recorder.
The slate mic will turn o when you release the switch.
Using the Slate Mic to Record on Desired
Tracks of the Recorder
1. Choose [MENU]Ú<SYSTEM SETUP>Ú<SLATE MIC ON/
OFF>.
<SLATE MIC ON/OFF> is located on page 5/6. Touch to access
5/6.
2. Touch the icon for each channel to turn it on/o.
MEMO
• If the slate mic’s track setting is ON, it will be output to all
destinations (recorder, OUTPUT jacks, and USB).
• For details about slate mic and slate tone routing, refer to ”R-88
Block Diagram” (p. 74).
Find Your Products By Category
Please Login
