0
Owner's of the JVC Camcorder JVC Camcorder gave it a score of 0 out of 5. Here's how the scores stacked up:
White Balance Item
Preset Temp.
For setting the color temperature when the [WHT
BAL] switch is set to “PRESET”.
For details, refer to “[Adjusting the White
Balance] P 53”.
Alternative Temp.
For setting the alternative color temperature in the
Preset mode.
When the [WHT BAL] switch is set to “PRESET”,
pressing the [y] button each time switches the
color temperature setting in the Preset mode.
([Preset Temp.] 1 [Alternative Temp.])
For details, refer to “[Adjusting the White
Balance] P 53”.
AWB Paint
For adjusting the R (red)/B (blue) component in the
AWB (Auto White Balance) mode.
For details, refer to “[Adjusting the White
Balance] P 53”.
0
Increase the number:
Strengthens the red/blue.
0
Decrease the number:
Weakens the red/blue.
[Setting Values: -32 to +32 (R 0)]
Memo :
0
This item is selectable when the [WHT BAL]
switch on the right of the camera recorder is set
to “A” or “B”. When “PRESET” is set, this item
appears as “---” and cannot be selected.
0
Different values can be specified for “A” and “B”.
0
After the [y] (Auto White Balance) button is
pressed to readjust the white balance while
[Clear Paint After AWB] is set to “On”, R and B
values switch automatically to “0”.
Clear Paint After AWB
For specifying whether to clear the [AWB Paint] (R
value and B value) settings after executing AWB
(Auto White Balance).
0
On:
Sets the [AWB Paint] (R value and B value)
settings to “0” after executing AWB (Auto White
Balance).
0
Off:
Does not change the [AWB Paint] (R value and
B value) settings after executing AWB (Auto
White Balance).
[Setting Values: ROn, Off]
FAW Paint
For adjusting the R (red)/B (blue) component
during FAW (Full Auto White Balance) mode.
0
Increase the number:
Strengthens the red/blue.
0
Decrease the number:
Weakens the red/blue.
[Setting Values: -32 to +32 (R 0)]
TC/UB Menu
Menu screen for setting time code and user’s bit.
This item cannot be selected in the Media mode,
or during recording.
TC Generator
For setting the operation of the time code.
0
Free Run(Ext):
External time code input will be synchronized
with this and the time code will be recorded.
0
Free Run:
The time code operates in the run mode at all
times regardless of the recording status. It
continues to run even when the power of the
camera recorder is turned off.
0
Rec Run:
The time code operates in the run mode during
recording. It continues to run in the order of the
recorded clips as long as the SD card is not
replaced. If the SD card is removed and
recording is made on another card, time code
will be recorded on the new card from where it
was left off in the previous card.
96
Menu Display and Detailed Settings
Find Your Products By Category
Please Login
