JVC Camcorder JVC Camcorder User Manual

0

Out of 0 Ratings

Owner's of the JVC Camcorder JVC Camcorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 136
 
Symptom Action
Images on the LCD monitor
and viewfinder screen appear
dark or blurred.
0
Readjust the brightness of the LCD monitor and viewfinder.
0
Is the [ND FILTER] switch set to “1/64”?
0
Is the iris closed?
0
Is the shutter speed setting too high?
0
Is the amount of peaking too little? Use the [PEAKING +/-] button to
adjust the contour for the LCD monitor and the viewfinder screen.
(A P34 [Adjusting the LCD Monitor] )
(A P35 [Adjusting the Viewfinder] )
The [CH1/CH2] recording level
adjustment knob does not
work.
0
Is the [CH1/CH2 AUTO/MANUAL] switch set to “AUTO”?
0
Is the [FULL AUTO] switch set to “ON”?
Is the [FULL AUTO] switch set to “ON”, and [Audio On FULL AUTO]
in [Audio Set] of the [A/V Set] menu set to “Auto”?
(A P103 [ Audio On FULL AUTO ] )
SD card cannot be initialized
(formatted).
Is the write-protect switch of the SD card turned on?
Make sure that the write-protect switch is turned off.
(A P37 [Write-Protect Switch on the SD Card] )
Battery alarm appears even
after loading a charged
battery.
Is the battery too old?
The time code and user’s bit
are not displayed.
0
Even in Camera mode or Media mode, the time code and user’s bit
may not be displayed depending to the type of display.
0
Is [TC/UB] of [Display Settings] in the [LCD/VF] menu set to “Off”? To
display the time code and user’s bit, set it to “TC” or “UB”.
(A P100 [ TC/UB ] )
The date and time are not
displayed.
0
The date and time are only displayed on the Display 1 and Display 2
screens in the Camera mode (during shooting).
(A P112 [Display Screen in Camera Mode] )
0
Is [Time Stamp] of [Record Set] in the [System] menu set to “On”? To
display the time code and user’s bit, set it to “Off”.
(A P107 [ Time Stamp ] )
Incorrect display on the
viewfinder.
Is the LCD monitor used with [LCD + VF] in the [LCD/VF] menu set to “Off”?
(A P97 [LCD/VF Menu] )
The actual recording time is
shorter than the estimated
time.
0
The recordable time may be shorter depending on the shooting
conditions or the subject.
The two camera recorders are
not synchronized even though
the time codes have been
synchronized. (Z on the Slave
device is not displayed.)
0
Is the [TC IN/OUT] switch correctly set?
(A P64 [Synchronizing Time Code on Another Camera] )
0
Set [System] B [Record Set] B [Record Format] B [Frame & Bit
Rate] such that the two camera recorders have the same frame rate.
(A P106 [ Frame & Bit Rate ] )
131
Others

   Find Your Products By Category