JVC Camcorder JVC Camcorder User Manual

0

Out of 0 Ratings

Owner's of the JVC Camcorder JVC Camcorder gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 136
 
A/V Set Menu
Menu screen for video output and audio.
Video Set...
For specifying video output-related settings.
(A P101 [Video Set Item] )
Audio Set...
For specifying audio-related settings.
(A P102 [Audio Set Item] )
Video Set Item
Display On TV
For setting whether to display the display and menu
characters on the external monitor.
[Setting Values: On, ROff]
HDMI/SDI Out
For setting the terminal to output the video.
[Setting Values: HDMI+SDI, SDI, HDMI, ROff]
9
Resolution
For selecting the resolution of video output from the
[HDMI]/[SDI] terminal according to the monitor to
be connected.
[Setting Values: 576i, 576p, 480i, 480p, 720p,
R1080i]
Memo :
0
The selectable options vary according to the
setting in [System]/[Resolution]/[Frame & Bit
Rate] of [System] menu B [Record Set] B
[Record Format].
0
Cross conversion output is not possible.
9
HDMI Color
0
For setting the color format of HDMI signals.
0
This item is selectable only when [HDMI/SDI
Out] is set to “HDMI” or “HDMI+SDI”.
[Setting Values: RGB, RAuto]
9
HDMI Enhance
0
For setting the color range of HDMI signals.
When connecting to a PC monitor, set this to
“On”.
0
This item is selectable only when [HDMI/SDI
Out] is set to “HDMI” or “HDMI+SDI”.
[Setting Values: On, ROff]
SD Aspect
For setting the style of displaying down-converted
images on a 4:3 aspect ratio screen.
0
Side Cut:
Displays image with the left and right sides cut
off.
0
Letter:
Displays as a wide image with the top and
bottom blackened.
0
Squeeze:
Displays image that is squeezed horizontally.
[Setting Values: Side Cut, Letter, RSqueeze]
Memo :
0
When [System] in the [Record Format] menu is
set to “SD” and [SD Aspect] is set to “4:3”, this
item appears as “---” and cannot be selected.
(A P105 [ System ] )
SD Set Up
For selecting whether to add a setup signal to the
video signal output from the [AV] output terminal.
Setup signals are added when “7.5%” is selected.
[Setting Values: 7.5%, 0.0%]
(Default values: 7.5% (U model), fixed at “0.0%” (E
model))
Memo :
0
Depending on the menu settings of the camera
recorder and the condition of the cable
connected to it, the setup signal setting may be
fixed at “0.0%”. “0.0%” is displayed in gray in this
case.
101
Menu Display and Detailed Settings

   Find Your Products By Category